NEWB 80 pic

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 28, 2005
Threads
34
Messages
399
Location
TN
So far the fluids are base-lined, slightly used 32" BFG AT's, PIA di-chromatic Fogs (still need to do the JD low beam mod), Yakima gutter rail bike rack, with cannoe gunnels (stock roof rack removed), Side-steps removed (they were bolted on with 6 1/4" self drilled screws. No wonder they were falling off when I bought it.), DVD with 2 headreast screens, new floor mats, multi electric 12V outlet.

About to do the front axle service, Drive-shafts rebuilt, oilpan gaskets, PWR steering pump and hoses, belts, Yota plug wires, pass mirror guts, antenna, single din CD player, CB beneath, and some new front seat covers. I'm sagging to the driver's side, and the shocks are gone, so... I guess a medium OME kit soon.

A new addiction, She really is a nice DD, and I've been driving the heck out of her. Last week I had 5 kids, and me plus another adult loaded in for a trip to the movies. Before we had to go in two cars.

I'l get some in the dirt pictures soon.

Crusherpics036.jpg


My garage has gone from Jeep central, to one Jeep two Toyotas, and a Mazda 626. I'm glad the Jeep will still fit in the 7' door, as the Cruiser is about to take the 8' + door when I put the OME kit on. The cannoe is just above that side on pullies, so that will be perfect for my new adventure vehicle.
 
I'm a semi converted Heep Head. This is my first cruiser, bought it on the 22 of Nov. After finding this site, and trying to argue Jeeps. Well, you see where that got me.

I'm a Newb, only not new to wheelin' Toyotas, or Heeps though. Just new to the Cruiser thing, and I do understand... Now...:D
 
welcome out of the closet

Lurking closet that is..

No kidding!! Member since 2005 and only 77 posts (not that post count means anything). But to say you've been lurking is like saying water is wet.
 
75 posts...:D Atonement for my wayward Heepness...

Thanks for the compliments.

They are 32x11.50x15's. No rubbing, I think 33's would fit fine.

I love this Truck!
 
Thanks Tired Iron and JD. I'm in Franklin TN. I'd like to do some wheelin' sometime. Let me know. We have some great places wround here, or I could make a trip out east.
 
Last edited:
Just FYI on the garage door thing...

My OME 850/863 with ARB, M12K, Hanna sliders and Slee rear on 285/75R16 MTRs fits inside an 83.5" garage door AFTER I removed the roof rack. With the rack it was 1&3/4" too tall.

No, I didn't crash to figure it out. Use a level and a tape. Easy.

Now To fill that last 1.5" of garage...
 
They are the strap ons...:eek: and are 7" wide screens. I ran the wires thriough the seat covers. I bought one with a seperate DVD player that sits on top of the center console. Also fits next to the T-case shifter under the dash.

Thanks for the H-UP on the heighth. I might be in the 8.5 ' side before I know it. My 7' door openning really measures 7.5', so I might be able to stay on that side.

:D '88
 
Back
Top Bottom