I am surprised you ran into an issue, but perhaps I got lucky because I'm already running 1.25" spidertrax spacers on mine. Just to satisfy my curiosity next time I have the wheels off, I'll remove 1 spacer and test fit the wheel on the hub...
NEW Tundra TRD Pro forged BBS wheels
- Thread starter bjowett
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Sounds good. If u don’t mind doing that please. I’m hoping the 1.25” spacers will work out for me. Thanks!
I like the lift kit and the gold wheels goes nicely with the silver paint. What spring are you running on? Thanks again for the pictures!!!
Dobinson's 2.5" lift spring
I really like your setup as u used quality parts and did it nicely. Thank you for sharing.
DesertRun, my wife and I just got a white 2018 and we found a set of the same wheels, your setup looks great. What size KO2s are those and what kind of lift kit are you using? We are new to everything and would love some advice.
Can anyone tell me exactly which wheels I have? I have seen lots of similar ones, but not these exact wheels. I love how they look, but they actually good?
Those are Tundra TRD Pro wheels.
pre 2018 tundra TRD Pro wheels
I’m glad you added this information. I’ve checked fit on 2015 LX570, same issue on the front. Looks like I’ll have a set of wheels for sale, don’t want to add spacers.
how many you have?
I just put the trd pro forged wheels on my 05 lx470 a few days ago, ended up using a 1.5” spacer. The 1.25” might have fit but was going to be super tight against the nuts around the center hub.
1st pic is the rim pressed up on the hub with no spacer. you can see the nuts hindering the center
This picture is with the 1.5” spacer on and the rim completely mounted before I put the center red cover on. Just clears.
1st pic is the rim pressed up on the hub with no spacer. you can see the nuts hindering the center
This picture is with the 1.5” spacer on and the rim completely mounted before I put the center red cover on. Just clears.
You won't (can't) have the same issues as @Mater Stout did on his '00 LX470 with the front hubs interfering with the wheels. LX470 front hubs are very different animals than your LX570 front hubs. These wheels are made for the LX570/LC200, and 2nd gen Tundra, Sequoia hub design.
You may want to double check before you sell, because these wheels should fit your '15 just fine without spacers.
Last edited:
I do seem to remember something about the hub covers being different and maybe not fitting on late model cruisers but assumed that was 16+ with their larger brakes.
Did the LX get bigger brakes in 16 as well?
Did the LX get bigger brakes in 16 as well?