New Aluminum TEQ badges

[zombieblaster]

Man those look great!

 

[bhicks]

I have added a few more aluminum badges to the line up. These are the retro badges that folks have been asking for. They are inspired by the FJ40 badges. I also added a few more aluminum grill badges and rear hatch badges to the lineup. I'm almost done converting all badges to aluminum. You can see all of my new aluminum badges at www.bh3dprinting.com

 

[little_joe]

Does that badge on the 100 grille fit the GX too?

 

[bhicks]

Does that badge on the 100 grille fit the GX too?

I'm not sure. What is the height and depth of the GX badge? Would also need to see what the grill looks like behind the factory badge.

 

[bhicks]

Here's the new LX450 badge. It's now up on my site.

 

[bhicks]

Looking for some pics of installed badges. Specifically I need pics of the two new badges; the "TOYOTA" badge and the new LX450 TEQ badge. You can post here or shoot me a PM/start a conversation and I can send you my email.

 

[Hogan]

Would any of the oval one fit in the grill of a 08 Tundra? Thanks

 

[bhicks]

Would any of the oval one fit in the grill of a 08 Tundra? Thanks

Don't know. What is the width and height of the factory badge? I will compare that to all my badges and get back to you with an answer. I made a custom one off badge for a 06 Tundra Owner about a year ago but that is a totally different body style. Pretty sure the badge is a different size on your 08.

 

[Hogan]

6 3/4" x 4 5/8" give or take a 1/16"

 

[bhicks]

6 3/4" x 4 5/8" give or take a 1/16"

I will check those numbers when I get home later this afternoon.

 

[Hogan]

Any luck?

 

[bhicks]

Any luck?

So sorry about forgetting this question. The 06-07 100 series TEQ grille badge is that exact dimensions. If you buy one and for some reason it doesn't fit then just ship it back for a full refund. Here is the link:
Aluminum 80/100 series TEQ grill badge | BH3D Printing

 

[Klonky99]

any chance of 60 series badges?

 

[bhicks]

I actually recently got a 60 series donor grille. I designed the 60 series TEQ badge but ran into issues. The 60 series Grill has a fake Chrome coating on it. The fake crome was bubbling up on the grille I have. When I use adhesive it would literally just rip the fake Chrome off the grill. I could use screws for attachment but I wasn't sure how many 60 series guys would be comfortable drilling holes in their grill? So at this point I am still trying to figure out a good system for attachment that doesn't have to modify the factory Grill.

 

[bhicks]

Just a heads up to all, that I am heading out of town through the 2nd of July for some camping, fishing, and hiking with the family. I wont be able to process or ship any orders until I return. I made sure I have a good batch of all products in stock so when I return I will be able to immediately start shipping. Sorry for the delay but I wanted to get the message out there. I leave early tomorrow morning so I will try my best to get any orders that come in today boxed up tonight and dropped off at the post office on Monday along our trip route but no guarntees.

 

[bhicks]

I'm back from camping and the first huge wave of orders go out today. The rest of the orders that came in while I was gone will go out tomorrow and the ones that came in over the last two days will go out on Wednesday. Then I will be able to finally breath again.

 

[Sdr64]

I have been making the TEQ badges out of plastic with my 3D printers for almost 2 years now and the time has come to take it to the next level. I am releasing the round and oval TEQ universal badges in an aluminum version. The price went up due to the fact that machining in aluminum is a LOT more expensive then printing in plastic BUT I really like how they turned out and feel they are worth the new price. Here is the link:
Aluminum TEQ Universal Badge (Round and Oval) | BH3D Printing
I also just released the retro "4 Wheel Drive" badge:
Aluminum Retro “4 Wheel Drive Badge” | BH3D Printing

Here are some pics of them all.

I ordered cup dual cup holders front and rear in tan for my FJ80 and paid via PayPal. Haven’t received anything, confirmation, tracking, nothing?? Your website doesn’t provide a contact number to discuss issues either?
Sean 918-521-1688
Oklahoma

 

[bhicks]

I ordered cup dual cup holders front and rear in tan for my FJ80 and paid via PayPal. Haven’t received anything, confirmation, tracking, nothing?? Your website doesn’t provide a contact number to discuss issues either?
Sean 918-521-1688
Oklahoma

Looks like we already talked over on etsy and you have the shipping info. Tracking info will be sent out soon.

 

[subspd]

Got gx470 teq badges?

 

[bhicks]

Got gx470 teq badges?

Shoot me a message. I'm pretty sure I have something that will work for you.