Need help! My first cruiser

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2006
Threads
23
Messages
121
Location
Fayetteville, Arkansas
I picked up my first fj40 and it is pretty much a pile of crap but I am hoping with some help from you guys and a lot of work I can make it a good trail truck. Keep in mind I never intend this to be a dd but I would like for it to be streetable and able to drive for a few hundred miles if needed. I was wondering what is the largest tires people have ran with good results on the stock axles with shaft upgrades? also I am going to need help from people who have replaced the rear quarter panels. I will post a few pics to let you see what I am going to be dealing with. Any input is appreciated however remember I am hoping not to spend a fortune.
DSC00269.webp
DSC00270.webp
 
my worries are fixing the rust on the quarter panels where it spot welds to the inner fender, the drivers side is even worse. I dont trust my welding skills to put on a quarter panel however I know I can take care of the rest of the build. I will have a pic of the entire heep soon.
 
I guess I can tell you a little about what I came up with. It is a 79 or newer (waiting on the title for exact year) it has a aa bellhousing adapter for a 350 to the stock 4 sp with a pto transfer case that I don't know what I am going to do with. I got 4 axles 2 front 2 rear. Both fronts have disc brakes and one of the rears has disc brakes. the motor is blown but I want to use a new crate motor and that is where most of my money will be going. The disc brake rear axle is locked but I am not sure how yet, it already has power steering installed and seems to be done correctly. Oh and I need to mention I got this thing for free, all of it. So lets here what you have to say.
 
First off...welcome to the addiction.

Second... I"m sure in that welcome someone will be sticking you the bird... (It's a welcome thing...but I'll leave that slow ball to someone else).

Third... someone else will say, "Search is your friend" ... but they are very much right. There are many many threads on quarter panels .. one today as a matter of fact I think. Also, your rig is at least a 79 judging from the pick of the position of your fuel tank. You can tell in all sorts of ways from tags, frame number and the year the engine was cast as well. ...all from the search functions.

So... having not given you really any useful information... welcome anyway :) ...and post lots of pics of your build so we can live vicariously through you!

Good luck
Scott
 
Free? Nice score. Get her running first and worry about body crap later. By the time it's on the trail you will have met someone who does know how to weld and you can buy them beer to do it for you!

Welcome to the addiction... :-)
 
You rig is not all that bad just get a list of things you need and start from there. You need help so you came to the rihgt place good luck post up you when you need help.
 
numtel thanks for the reply I was hoping this was true
just to let everyone know, I have used and frequently use the search option sometimes it is just hard to type in the exact keyword to find what you are looking for. Thanks to everyone for the welcome though and I will be posting allot as the build progresses. The first order of business is just to get it cleaned up and start sanding down the body and frame. I intend to use ford towers and to flip the springs around for better wheel base. I am not going for a resto just to do things right as I go and not have to backtrack. Intending on doing all the sanding and cleaning while I wait to get a crate motor.
 
Not sure which crate motor you have picked out or what the price is on it, but you could probably save yourself some coin by finding a 2F, maybe even out of an fj60 for a lot cheaper, and have money to do other things to your truck, AND you'll still have a Toyota!

Hate to see you blow all your coin on a big, bad motor, only to still have a truck that needs lots of other things. You could then save your money for all the other things, and there will be other things, that need attention. Just my .02. Good luck, and welcome to Mud!
 
I am just going for a 245 horse 350 crate motor from gm. A 350 came out of it and it will be easier just to put that right back in. If I wanted to put in a cheaper motor I could find one in about 12 hours for a few hundred dollars but I would rather have fuel injection and reliability right from the start.
 
jjhancock said:
Not sure which crate motor you have picked out or what the price is on it, but you could probably save yourself some coin by finding a 2F, maybe even out of an fj60 for a lot cheaper, and have money to do other things to your truck, AND you'll still have a Toyota!

Hate to see you blow all your coin on a big, bad motor, only to still have a truck that needs lots of other things. You could then save your money for all the other things, and there will be other things, that need attention. Just my .02. Good luck, and welcome to Mud!

Umm..

I disagree.


The cruiser is already set up for a SBC and a crate engine is not that expensive. Plus your paying for a brand new engine, instead of going through alot of hassle and still have a 100k engine to deal with.
 
the majority of the money will be spent on the longfield's and the motor as well as a front locker. It already has some great parts so that is a big help. The body is going to have the quarters trimmed allot and I don't intend on even running the front fenders although they are in perfect shape so I think I am going to be able to get away with a very small amount of lift. I am more focussed on down travel than up travel. Thinking of using revolving shackles of some sort. I really like what treeroot has done.
 
anyone out there have any use for a pto output for the t-case because I definetly dont. Also I need the round black cover that goes on the back of the t-case mine seems to have walked off. if anyone is interested in the pto let me know through pm or email
 
Colorado Boy-74-FJ40 said:
The cruiser will suck every spare cent out of you! MONEY PIT. Welcome to the addiction

I have barely even started to work on it and have already realized that. Luckily my dad and brother just bought a front end/tire/oil change shop with lots more tools and 3 car lifts.
 
my64fj40 said:
Umm..

I disagree.


The cruiser is already set up for a SBC and a crate engine is not that expensive. Plus your paying for a brand new engine, instead of going through alot of hassle and still have a 100k engine to deal with.


I didn't realize that it was a 350 that came out of it, but thought that it was in mid-conversion and in pieces when he got it. Knowing the facts now I disagree with me too :doh:

What does a crate engine go for, anyway?
 
Cool Cruisers of Texas sells pre made to fit. No I don't work for them, I just bought a set and seem nice. Good luck. I'm working on my first one as well. Eric
 
Bad Coco said:
Cool Cruisers of Texas sells pre made to fit. No I don't work for them, I just bought a set and seem nice. Good luck. I'm working on my first one as well. Eric

I have been looking at the quarter panels ccot has. They look like great pieces and also for a great price. I am going to get down into the rust and just see hwo far it goes. I plan on cutting the rear quarters out allot so I don't want to buy new panels just to saw them to pieces. I am thinking of just using thin sheet metal and adding more metal where needed and making some patch pieces. I would rather tear the crap out of it than make it look great, as long as I don't fall through the floor from rust I am going to wheel it until I can get enough money to really go after the tub, I hate to fix one thing when 3 or 4 areas need attention. Thanks for the input, let me know how your parts work out
 
Back
Top Bottom