Name these parts.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 26, 2014
Threads
80
Messages
1,412
Location
Tucson, AZ
I have these 3 parts that came with the ton of parts I got with my LC. I have narrowed much of it down, but I still have some unknown parts.here are 3... any help is greatly appreciated. By the way the cruiser is a factory hard top April of 77.

76D2EEF2-B87F-4DC0-B537-DA494B56C251.webp


F472EDA3-E43D-445D-BC65-7E61ADA0E479.webp


C81CABE3-F3CF-44A7-9114-B250D6011D59.webp
 
second pic looks to be intake heat riser, as stated above. Fits inside of stock air cleaner housing. ……...I think.
 
Thank you @spotcruiser, I’ll put those mounts in the sell/discard pile.

If the last 2 pictures are in the air box, god does it attach? I have been playing with it (because I assumed it was something to do with air) but can’t seem to fit it anywhere.
 
IMG_1757.webp
A pic I stole from another mudder, but hope this helps. I believe the butterfly mounts from the bottom of the air cleaner. Remove air cleaner and turn it over.
 
Here’s mine after cleanup and riveted on the air cleaner intake plate. I think there’s 8 sheet metal screws holding the plate on. Just below is the where the duct that comes goes to the exhaust manifold is.

49C297C0-4A66-48F9-8266-55C2BF3FD3C7.webp
 
Ok, took apart the air intake.. so hers why I didn’t see where it went. The po riveted and glued the panels closed. It looks like it controls air intake by temperature.

3CBB1CF5-0D93-4833-B3FA-E0D9627F9032.webp


F130ED07-5124-42C1-83D3-BC825B68091B.webp


A035A450-A250-4742-AB79-39B451E2FF17.webp


73B0ED14-A237-4E9D-AD1F-D1E2D8F8304B.webp
 
Back
Top Bottom