My Grinder Slipped!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 18, 2008
Threads
3
Messages
14
Location
Austin, TX
Hello, thought this might be a fun way to formally introduce myself on the forums. My name is Max, I'm a long time Toyota fan and new owner of an LX-450. Over the years, I've owned 3 other Toyota vehicles before landing into the FZJ80 ('84 pickup, '86 4-Runner - slightly modified, and a 2000 4-Runner). I enjoy the outdoors; hunting, fishing, hiking, etc. The goal for my LX-450 is to have a dependable daily driver that I'm not afraid to take off the beaten path. I do not, at this point, anticipate rock crawling with her (or, at least not what I consider rock crawling).

On to the good stuff. I recently ordered a Short Bus for my new-to-me LX. I had spoken to Christo on the phone, and was concerned that the Short Bus wouldn't fit an integrated solenoid winch. The one key point he made to peak my interest, was that he had never tried it....only that the bumper wasn't designed for it. Coming from a previous wheeling rig (that I sold 3 years ago), I already had invested in the 9500i with RockStomper synthetic / hook and a SpiderTrax hawse. I really didn't want to sell the winch for a loss and replace it with a known match for the bumper...I was determined to get the bumper first and then determine what was required to make it work (if at all).

Well, yesterday my grinder slipped and made some cuts in my grill!! :doh: It just so happened that the cuts made a nice cozy spot to fit my HS 9500i into the Short Bus :hhmm:. So, it turns out, if you don't mind cutting the first row of your grill out....the HS9500i makes a rather nice fit in the Short Bus. Only problem is that you still need to fab up a connection point for a front license plate (at least here in Texas).

LX450_SB9500i.jpg

LX450_SB9500i3.jpg

LX450_SB9500i2.jpg

LX450_SB9500i4.jpg


Well, I'm loving my LX. I still need to address the broken antennae and install the OME's, but this thing drives like a tank. The first thing I did was install the Toyo A/T's (again, this is not a full time wheeling rig), the original tires were shot.

I would like to also thank the forum community for all of the valuable information. I look forward to giving back to the MUD whenever I have an opportunity to do so.

Hook'em!
Max

FYI: I'm scared to take off the bug deflector...I'm afraid of what is underneath. I will need to get the courage to remove it, see what's there, and then make a keep / toss decision.
 
Welcome & great looking rig!! :flipoff2:
 
Welcome! Nice bumper and winch. :flipoff2:

FWIW, if you search, you will find quite a bit on those bug deflectors. I personally would take it off and I don't think it's an issue. In fact, someone broke theirs recently and posted that they were looking for one....can't remember who it was but it was in the last 2 months.
 
Thanks for the welcome! I will admit, it was a fun one banana job...and I enjoyed seeing a few sparks fly from a Lexus, lol. The bug deflector was removed earlier...the truck looks better now. Again, thanks for the welcome. I need to baseline the rig and give CDan a call to order some tuneup items. Best, Max
 
Welcome! Nice bumper and winch. :flipoff2:

FWIW, if you search, you will find quite a bit on those bug deflectors. I personally would take it off and I don't think it's an issue. In fact, someone broke theirs recently and posted that they were looking for one....can't remember who it was but it was in the last 2 months.

I think it was LXtreme
 
nice....
but where's the cuts?

got the same bumper, sans winch, so i'm interested in what you cut.
 
Nice LX, looks like you did well. I can't spot the cuts in the grill either, so it must be pretty minor.

Get on that baselining ASAP. I am doing a front axle rebuild on the wife's LX right now. The truck has almost 118k on it and from the looks of the innards, I don't think the 60k service was ever done. It had significant wear to some of the wheel bearings/races, trunnion bearings were all chewed up and the passenger side spindle bushing was dry.

Welcome to MUD!:cheers:
 
Back
Top Bottom