My first Toyota

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 27, 2019
Threads
1
Messages
4
Location
Syracuse NY
Came across this 94 FJZ80. It was rolled, but seems in good shape mechanically and frame is solid.
Build sheet doesn't list any lockers.

A-Pillars look straight enough to put a windshield back in, but driver door, fenders, hood, and front bumper are all pretty well screwed.

Previous owner says it has a "6in Old Man Emu lift", but I can't seem to find an OME 6", so not sure how accurate that is, but this thing towers over my 2.5" lifted 04 Grand Cherokee.

1577459873836.webp

1577460193866.webp

1577460216655.webp

1577460299062.webp


Looking forward to ripping into it over the winter. Going to be looking for parts, going through mechanical, and building some steel bumpers/safari rack for it.

1577460199413.webp
 
Man that thing is good to go already, just wear some goggles when you drive it!
 
Congrats!

What size tires are those? It sure doesn't look like a 6" lift. Check for tags and colors on the springs and post pics. Someone here can help identify.

Check with @slow95z or @arcteryx as they both do salvage 80's.

Looks like a lot of work.

Build sheet may not show lockers, but are there switches and such to indicate aftermarket lockers?
 
Congrats!

What size tires are those? It sure doesn't look like a 6" lift. Check for tags and colors on the springs and post pics. Someone here can help identify.

Check with @slow95z or @arcteryx as they both do salvage 80's.

Looks like a lot of work.

Build sheet may not show lockers, but are there switches and such to indicate aftermarket lockers?

Tires are 33" diameter.

The dash is pretty well torn apart (everything is there, just not in place). Haven't had a chance to unpack it all yet.

Thanks for the recommendations on parts. It's definitely going to be a winter project, but for $450, it seemed a worthwhile grab.
 
Something about the RF wheel looks like it was tweaked or wheel bearings are loose as hell.
 
Knowing it's been in a roll, I would lean more towards the likelihood of a bent axle housing. But you may luck out and just have some really shot bearings.
 
man leave it like it is and wheel it, there is no fixing that truck. for what it would cost to fix it correctly you could buy 2 in great shape.

i wouldnt fix anything on it other than mechanical stuff. dont put a ton of money into that. wheel it as is to get a feel then if you like it buy a better one and use that as parts for your new one. i honestly wouldnt even buy that as a part out rig myself lol.
 
If that's a '94, they did a great job of filling the flare holes. Cant even tell it had flares.

And I bet it's an OME 3" plus some spacer. My OME 3" gave me 4" in the rear when empty.
 
Last edited:
man leave it like it is and wheel it, there is no fixing that truck. for what it would cost to fix it correctly you could buy 2 in great shape.

i wouldnt fix anything on it other than mechanical stuff. dont put a ton of money into that. wheel it as is to get a feel then if you like it buy a better one and use that as parts for your new one. i honestly wouldnt even buy that as a part out rig myself lol.
I’m with this dude. Restoring the body is going to be costly. That chassis is screaming for an FJ45 tub and bed or dare I say a CJ-8 tub to be slapped on it.

I bet the RF knuckle is damaged. Read the White Rhino thread on salvaging a rollover.
 
Back
Top Bottom