My first 80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 2, 2015
Threads
17
Messages
154
Location
Jupiter, Florida
Hi all. After realizing how hard it was to find parts for my 60, and realizing that I'm not as excited about a 4 speed as I was 20 years ago, I sold my 60 and purchased an 80.

I need advise on a spring kit. I would like about 2 inches of lift over stock height, (I definitely want the truck to sit level ). I have seen lift kits that leave the truck sitting way higher in the back than in the front.
I plan to add about 170 pounds of weight to the front (bumper/winch). I won't be adding much more than that. Maybe a rear bumper one day. I would like a soft ride.
What springs should I use??
 
Added Air Lift to mine for less than $100 and it sits nice and is adjustable.
Took an afternoon to install.
If I haul I will air it up.
 
I don't have this kit but have been researching a lot and it sounds like people are really happy with the TJM kit. Think I'm going to pull the trigger on it this summer. Also people seem to like Iron Man but I've read some people have had to add Spacers to make it sit level.
 
I'm sure you would be happy with the TJM with those adjustable 9 way Tiger shocks or the OME stock height springs 861/862. If additional height is needed the just add a 30mm coil spacer in.
The OME has a dual rate coil 170lb./250lb. in front &170lb./260lb.
Also new to the USA is the Slinky dual rate coils that come in 50mm, 70mm & 75mm lifts.
Just remember to get level lifts you need to go 1" taller in front. Meaning you need a 2" lift in front & a 1" lift in rear to be level.

Welcome
 
Congrats on your 80 purchase and welcome to the community.
 
Back
Top Bottom