MWB FRP tops again?
- Thread starter lowenbrau
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,123
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
I want one!!
Looks like a Pickup that was modified.
~John
Looks like a Pickup that was modified.
~John
awsome rig
- Thread starter
- #4
Me too. You should see the interior.
Wheelbase looks too short for a pickup and that top is for sure an FRP top cut down. I suppose it could be an older rig with a new style front clip.
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,123
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
A few clues... the graphics disappear into the front fender area. The clip may have been changed. The LHD, and coil front is kind of nice.
Do you have a link with more info on this unit?
~John
Do you have a link with more info on this unit?
~John
- Thread starter
- #6
Good catch. That makes sense.
The webaddress on the side takes you to a couple more photos at the manufacturers site but it was at last years Allrad show in Germany. I really need to get over to that one some time. 1000 rigs and 300 vendor booths.
http://dinoevo.de/gallery/overland-expo/
Looks like a HZJ-74 chassis, Either it is me or the angle , it looks like ther is an "arch" between the rear spring perch and shackle.
I couldnt afford it . The Germans and the campers rigs , NICE !
I couldnt afford it . The Germans and the campers rigs , NICE !
Last edited:
that would be even better than FZJ71 .. let's dream in VDJ74 factory lockers, snorkel and winch ! uff ..
Mwb , 5 stud wheels on a pickup = 79,79 series ,don't have front window hinges unless special order
My bets a hzj-74 with new front and and front body mounts modified 50 mm wider each side to support the front
Germany still gets the hzjs
Bonnets come from Aus
A dude in uae or somewhere there bought a vdj bonnet from my local parts supplier, for the intercooler version bonnet
My bets a hzj-74 with new front and and front body mounts modified 50 mm wider each side to support the front
Germany still gets the hzjs
Bonnets come from Aus
A dude in uae or somewhere there bought a vdj bonnet from my local parts supplier, for the intercooler version bonnet
the FRP top makes sense ... kind of.
you can remove the top and back to become a pickup again. if done right it would take very little to make it happen.
so
you have a camper for the few times you head out and the rest of the year you have a pickup again.
but i might be wrong here.
you can remove the top and back to become a pickup again. if done right it would take very little to make it happen.
so
you have a camper for the few times you head out and the rest of the year you have a pickup again.
but i might be wrong here.