Mini PS Conversions Parts?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 16, 2006
Threads
66
Messages
185
Location
Altoona, Pa
I want to do a mini ps conversion on a F engine and was wandering what the best source is for the brackets, pump and hose. I have the gear box. I have looked at some on the past forums but didn't conclude a best source of the needed parts. Any help is appreciated so I do this once and right.
 
just look at the for sale sections for guys parting thier trucks. That is what I did. Got the box, hoses, pump, and res for 125. Also check the Marlin board they have tons there.
 
Here's where I got my stuff:

NAPA
BELT: PN 22474 11/16" x 48" $12
Saginaw cap PN 703-1515 $6
FLUID $5
RETURN LINE HOSE: 3/8” fuel line $8
High Pressure Line $60

GRAINGER
Pulley: PN 3x586 $30
Bushing: PN 3x573 $6

PUMP: Saginaw Pump ROCK AUTO $52
GEARBOX: Minitruck Gear Box $50
(Came with Highpressure line and return nipple)
Brackets (wdorry) $190

I bought my brackets from Will Dorry. They are really high quality, well made. You can also make them yourself, they are pretty simple. Marks offroad and Iron Pig Offroad also have fin quality.
http://photos.yahoo.com/wdorry
http://www.marksoffroad.com
http://www.ironpigoffroad.com

Power Steering Fluid
Dextron II ATF is fine and a number of other power steering fluids.

Power Steering Saginaw Pump Cap
the cap for the PS saginaw pump is NAPA 703-1515

Pulley
Iron Pig Off Road sells the pulley or Grainger or Martinssproket.com

Power Steering Pump
I got a Saginaw pump. I bought my pump from ROCK AUTO Part #: 206823

Here's my excel sheet
195627198.jpg
 
Last edited:
Back
Top Bottom