Metal Tech Slider ?'s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks fells for the kind words, I try to treat our customers the way I want to be treated. A lot of work went into the three years to develop the 80 sliders. And we are always tweaking things if we can improve upon them. This last run we changed the mounting arms so they are not open U channels that can collect mud (Woody ask if we could change that) . The new ones use a box tube that is fully enclosed. (Note this is the arm, not the main bodies the mains are still open on the back so we can powder coat the inside)

Barrypt5: Just Metal-tech for me for almost a year and a half now. This year is the 7th year for MT so it was about time. I don’t do as many 3AM’ers like I used to, but I also don’t fall asleep driving like I used to. I still work 6 days a week in the shop, 10-12 hr days but I get to see my boys more than before. I also don’t feel the big corporation I used to work for sucking on my sole and I go to work jazzed that I am doing what I love to do. Cruisers Rule!


Mark
 
Just Metal-tech for me for almost a year and a half now. This year is the 7th year for MT so it was about time. I don’t do as many 3AM’ers like I used to, but I also don’t fall asleep driving like I used to. I still work 6 days a week in the shop, 10-12 hr days but I get to see my boys more than before. I also don’t feel the big corporation I used to work for sucking on my sole and I go to work jazzed that I am doing what I love to do. Cruisers Rule!


Mark

I just keep this for the future .. pure inspiration !
 
...when you really start to look at the metal they used to make these sliders you will realize they definitely are in a different class...laser cut pieces and formed plate...very heavy duty

barrypt5

Sorry about the hijack, but since we are on the subject... How are these sliders in a salty/snowy environment? Will the underside catch slush and rust itself to pieces (like Doc's factory hitch)?
 
Chad: I designed rub rail to be parallel with the top of the rear kick out. If the set you have is not, then it’s a simple matter of the welder placing them incorrectly prior to welding. The more unfortunate thing here is he did not catch his mistake and sent them on the way. I will say the same thing that I would have said last night at 9:30 PM when you posted we were not open to ask this question; we will happily replace the slider. Please contact us when it is convenient for you and we will send you a replacement at our expense.

Mark: Excellent customer service, it was good talking with you yesterday and aside from the misalignment these sliders are top notch, and IMHO the most well designed slider avaliable today.

All: Please note my intentions of this post was not to flame Metal Tech or their products, it was simply for 411. I am a believer in their design and look foward to putting them to use with the satisifaction of knowing that these beasts will hold up to anything I throw at them.
 
Sorry about the hijack, but since we are on the subject... How are these sliders in a salty/snowy environment? Will the underside catch slush and rust itself to pieces (like Doc's factory hitch)?

i cant comment on the salt...they dont use that stuff out our way:D but every darn surface is powdercoated so even if some slush sat in there for an extended period of time i dont think it would hurt anything. *That is if slush would even sit in it...i dont think it would:meh:

barrypt5
 
Back
Top Bottom