lurking newb finally posting

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2006
Threads
4
Messages
46
Location
Grand Rapids, MI
Hey all....as the title says, I am finally posting...

Here is a "beat the dead horse" issue that I need a bit of help on...

My wife bought a 96 LC (she just had to have it w/ 150K and in great shape with an ARB front bumper) a couple of years ago, and now she is getting ready to step into a new FJ later this year.

My son (13yrs old) is looking at mom's LC and thinking about fixing up mom's truck (next summer) and loves the ROTW section of this site.

The biggest expense will be deciding if we swap the engine or rebuild.

I have read quite a bit of the forum discussions on swaps, but he won't need massive torque and hi-hp as a new driver, so it sounds as if going the SBC route is the way to go (for both expense and resources).

Should we look for a newer (5.3 or 5.7 Vortec) and where can I find the most reputable dealer for swap info and adapters?

Any other suggestions that I can pass along to my son to have him start working on raising the money for this project, would be greatly appreciated...

Thanks
 
If you're looking for projects to do with your son...

Has the truck been 'baselined'? I.e. bearing replace/repack, birfields, brakes, fluids, filters, radiator, fan clutch, thermostat, flush/fill...

For a new driver, I'd say stick with the existing power train if it isn't dead. The money spent on an engine swap could be spent on a lift, tires, sliders, rear bumper, cargo barrier, gears, etc...

IMHO YMMV
 
swapping in a SBC will be a big project especially if you have to pass emissions to register it. I'd recommend a rebuild if it needs it. I've been down the swap path before and it would be cheaper to rebuild the factory engine IMO. The little stuff nickel and dimes you to death on a swap.
 
The biggest expense will be deciding if we swap the engine or rebuild.

Assuming you have a completely shot 1FZ-FE engine; block and head.

1. You can buy a new short block from Cruiserdan for under $3k
2. You can buy a used head (if needed) and have it rebuilt for under $1K
3. Replace other parts that make sense "while you are in there" $1k
4. Reuse all the other components; intake, accessories, oil pans, sensors, etc.

So for under $5k you have essentially a NEW 1FZ-FE engine that will far outlast any SBC that you can do for $5k.

My 2c.

-B-
 
Why do you need to rebuild or replace the engine?
 
Hey, I recommend doing the engine swap, I, sixteen started it the other week with my dad and it has been a blast experience so far.. you just need to make sure you have the tools you need and as i saw above.. the small things really do nickel and dime you to hell.

But jeez its fun to be wrenching on that thing..:D

Oh and welcome to the posting!:flipoff2:
 
Great responses and questions...

There is nothing wrong with the current block other than 10+ yrs old, almost 200K on it, and it's a Toyota in the midwest rust belt...oh, and it eats about a quart per month. My only thought was that the LC is a heavy machine that was under-powered...

While my son and I have the time, I thought it would be worthwhile to skin some knuckles and splatter grease all over, that my son gets a rig that is dependable and we don't have to consistently worry about breakdowns...
hence the question about SBC swaps (easy to locate parts and cheaper parts)
It is especially tuff when the local Toy dealer quotes $2K for the cats alone and $300 for a tune up...and no, emissions are not a concern for now.

Fortunately, I came to the right forum and it sounds as if the popular opinion would be to rebuild...which is great...and I will need to start marking parts supply sites for LC's...

I think Beowulf has a great take on it and appreciate Trevdawg for letting me know how enjoyable this project will be...I know once we start ordering parts and get through this, my son will be back here in the classified sections for heavier springs, lifts, sliders, racks, snorkels and god knows what else....

Thanks for comments and keep em coming...
 
I like the solid dependability of the 1FZ-FE. Although parts might be easier to find for a small block...I'd rather wheel than wrench.


...and...CruiserDan's just a phone call away for parts ;)
 
My only thought was that the LC is a heavy machine that was under-powered...

Under-powered might be a bit harsh. True for the 3FE, but I would say the FZJ80 with the 1FZ-FE at 212hp is adequately powered. It won't win many races but it certainly is not a dog. When mine was stock, it would hit 100mph and cruise easily at 90mph (not that I did that routinely, but it could have.)

If you want a hot rod for your son then build up a 'stang or a ricer or a twin turbo Supra. The 80 is a giant brick that weighs close to 3-tonnes; even with a SBC engine, it isn't going to impress anyone at your local drag strip.

If you want a bit more performance for your son (or yourself) then keep your eye out for a TRD Super Charger (getting hard to find... might get easier soon) or pony up for a Turbo Charger system installed by Slee Offroad or do a custom turbo set-up like Landtank, Dusty, Sgt, Cattledog, et. al. You may start to see several doing custom turbos in the near future.

If the only reason you are considering an engine swap is due to the 200k miles then consider doing a project something like LX_Treme just finished. He basically rebuilt the stock 1FZ-FE engine in-situ. New pistons, rods, head gasket, injectors, and he had the head work done... probably a few other things that I have forgotten. Do all that when you add the custom turbo and you will blow the doors off of most SBC swaps (unless you come up against an LT1 swap like Kirk's. :D ) I think Kirk estimated something like $12k for his swap so it certainly wasn't a cheap project.

-B-
 
An engine swap is big bucks. Do you want to take a Michigan vehicle with almost 200k miles and spend a ton of money on an engine? I personally wouldn't sink a bunch of money into something that wasn't solid and rust free.

If you have the skills to do an engine swap you can pull the original engine and freshen it up for very little money. There is also the option of getting a good used engine. If your only problem is oil consumption I have read a bunch of threads where people have tried certain oils (like the Shell Rotella synthetic 5w-40) that have drastically cut down their consumption.

I would try to keep my costs down on a driver for a 16-yr. old. Save your money to help him pay for gas when it hits $5/gal.
 
OK OK.. I know enough to assert any further opinions that may be seen as maligning or impinging on the good name of the LC 80 Series and its powerplant...

I want dependability....not hp...and at 212 hhp and close to 3tons, I won't be worried about him winning drag races...

Michigan takes a toll, but if you keep the frame lubed and the sheet metal washed, it will last...

I see by the posts that rebuilding is the best option (economic and resource)...

I am going through different oils now to see if I can reduce the loss factor, but as I said, the LC should be retired by the end of this year only to be reborn again over the next couple of years, so current consumption is not a real big issue.

The truck is in great shape and good trucks (regardless of brand or model) should be coveted. My wife loves the idea that my son wants it and we will make sure it stays in the family. Your constructive suggestions have given me much to think about and the start of plans to come (not to mention how much my son will need to earn to start ordering parts...:D)
 
Sounds like the engine is just fine and working normally, 1qt of oil a month is not unusual and pretty costs about $12-20 a year, alot cheaper than an uneeded rebuild. If you have the money, and just want to rebuild for fun (and the experience with your son) then go for it!
 
Back
Top Bottom