I'd be very much interested in trying a set of your printed visor plates or at least the L (driver's) side, as my stock mount is cracking, but my visor (93) is holding up great. Flop-free.
Last edited:
LS400 ---> LX450 Sunvisor mod ! FZJ80 MUST HAVE !
- Thread starter 40thSagePearl
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Outsane
Supporting Vendor
@xprmntl They have been tested with no issues
solvefunction.com
LS430 or LS400 visor clips with mount adapter plate
I swapped out the Visors in the FZJ80 for LS430 visors, and the old clips were too small so I printed these. Comes as a set with mounting plates and visor clips for both sides. Video is from LS430 LS430 are Cloth and the LS400 are plastic. Visor clips vary from the early 80 series to the later...
solvefunction.com
I'm not looking for the adapter plate or clips for an LS400/430, I'm looking for the 3D printed mount (LH) to replace cracked original. The one that you pictured here: LS400 ---> LX450 Sunvisor mod ! FZJ80 MUST HAVE ! - https://forum.ih8mud.com/threads/ls400-lx450-sunvisor-mod-fzj80-must-have.959787/page-6#post-14005176@xprmntl They have been tested with no issues
LS430 or LS400 visor clips with mount adapter plate
I swapped out the Visors in the FZJ80 for LS430 visors, and the old clips were too small so I printed these. Comes as a set with mounting plates and visor clips for both sides. Video is from LS430 LS430 are Cloth and the LS400 are plastic. Visor clips vary from the early 80 series to the later...
So, how do I get hold of one of your 3D printed mounts? Maybe one of your adjustable bubble levels, as well?
Last edited:
Glad I came across this post. Went ahead and picked up a set off ebay, also bought the 3D printed mounts as posted above. Can’t wait to see how well these work. Thing I hate the most about my 450 is the sagging damn visors!
Outsane
Supporting Vendor
Fix all the annoying things!
Outsane
Supporting Vendor
Order from the site!
LS430 or LS400 visor clips with mount adapter plate
I swapped out the Visors in the FZJ80 for LS430 visors, and the old clips were too small so I printed these. Comes as a set with mounting plates and visor clips for both sides. Video is from LS430 LS430 are Cloth and the LS400 are plastic. Visor clips vary from the early 80 series to the later...
solvefunction.com
I'm not looking for the adapter plate or clips for an LS400/430, I'm looking for the 3D printed mount (LH) to replace cracked original. The one that you pictured here: LS400 ---> LX450 Sunvisor mod ! FZJ80 MUST HAVE ! - https://forum.ih8mud.com/threads/ls400-lx450-sunvisor-mod-fzj80-must-have.959787/page-6#post-14005176Order from the site!
LS430 or LS400 visor clips with mount adapter plate
I swapped out the Visors in the FZJ80 for LS430 visors, and the old clips were too small so I printed these. Comes as a set with mounting plates and visor clips for both sides. Video is from LS430 LS430 are Cloth and the LS400 are plastic. Visor clips vary from the early 80 series to the later...
So, how do I get hold of one of your 3D printed mounts? Maybe one of your adjustable bubble levels, as well?
Outsane
Supporting Vendor
I have the oak interior. Have they been tested? What plastic are you using? I hear the ASA plastic is best according to another Mud member>
FJ60 Solutions Offerings
View the tech thread here: Fj60 Solutions - https://forum.ih8mud.com/threads/fj60-solutions.1234894/ Currently I only offer interior parts for the FJ60 and some FJ62. Use code IH8MUD for free shipping within the USA. All of these products can be purchased at FJ60 Solutions by FJ60Solutions on...
forum.ih8mud.com
Outsane
Supporting Vendor
I use petg, you get to test... if it's not string enough I have another option
Well I jumped on flea bay Thursday night and ordered these. Very surprised they showed up today, that was fast! I got the vinyl tan visors, also they even included the plug from the vehicle. Not sure if I’m going to use that or not. Should get them mounted up tomorrow.
Francis K
SILVER Star
Those guys the LS430 or 400? Are they pretty much all the same fitment wise? They look nice I like the vinyl, easier to keep clean too…
95-97 ls400 is what the listing said. I’m guessing they are all about the same. I personally thought these would be easier to keep clean, and I think they look better!
I’ll find out tomorrow how well they fit. I didn’t buy the spacers that are mentioned above. Once they come in I’ll install those as well.
Outsane
Supporting Vendor
The visors are different and so are my mounts for each..
Are you referring to Ls400 vs Ls430 or right vs left?
Outsane
Supporting Vendor
When do you expect availability?
Tear
Outsane
Supporting Vendor
Ready to ship using Asa as material now
