lifts?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 12, 2005
Threads
287
Messages
3,081
Location
Littleton, Colorado
I would really like to do a lift on my 40. I think it would be easiest to do it now while its apart. I'm not sure how big, I was thinking of doin a 2 or 4 inch suspension lift and using a 2 inch shackle lift kit. What would you recomend. I know it all depends on what I want to do, I dont want to do anything super hard, and I wouldnt want to roll my cruiser. want as much lift as this picture or even possibly more. I considered doing an SOA but i dont have the money for that.

So basically what i am looking for is the cheapest way to get good clearence...
 
Last edited:
SEARCH! This topic has been hashed over soooo many times...


best bang for the buck is probably a skyjacker 4". Cheapest retailer is normally www.4wheelparts.com. It will net you room for 35's if you open up your rear wheel wells. Takes a weekend to install. I like the height.

OME dakkar is IMO the nicest spring out there now... see vender section. Not cheap.


If you want to wait a number months, my skyjacker should be up for sale... (going SOA this summer hopefully)
 
The link works for me.

Max. I have a skyjacker lift and bought it at 4 wheel parts. Be patient and they will have great sales. Then you go up to the local one off of Peoria and I-70 and they match that or a cheaper price that you find. Since yours is in pieces you can do this slowley and be patient. First thing you want to get is greasable and shackles and pins. Your welcome to look at my 40 and I'll show you how to do it. You can get thos at Rocky Mountain Cruisers.

It's great that you want to know and increase your knowledge and you don't pretend to know things you don't. You should start using the Search function more before you post some of your questions. Use the advanced option to limit it to this forum so you don't get answers on 80's and 100's.

Ken
 
They are two years old this month. They have maybe 6-8k miles. No sagging, the ride has not changed since being broken in.

I will be asking $300 for 4 springs and shocks. Spring poly bushings provided.

Don't plan on these being available. I will let you know when I have an idea of when/if they will be leaving the truck.
 
Back
Top Bottom