Learning resources

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 8, 2016
Threads
16
Messages
55
Location
Lake Jackson, TX
I am sure this has been covered, but I'm still struggling. I need help learning. I don't know much when it comes to stuff under the hood. I am quick to learn, but I don't have many who can teach me. I've been reading, but I am a visual learner. My biggest thing is learning all the parts to an engine and what they all do. I know my Cruiser needs work, but I've put it off so long because i dont know what exactly it needs, and out of fear of messing something up.
Picture and video resources would really help.
(And if anyone lives around South Houston who could teach a young buck a thing or too, I learn fast and I'll buy the steaks.)
 
My suggestion for basic engine functions is howitworks.com, they helped me figure out 4x4/allweel drive and differentials when I was new to my 80.

Factory Service Manual(FSM) has great written instructions and sometimes decent illustrations.

Texasknowhow on youtube has a good video on common oil leaks and maybe one on door locks too.

Look up your local TLCA club and see if you can get some hands-on help! Beer is probably the most common currency on Mud, so offering steaks and beers, you should get some takers.
 
The fear of making mistakes can be paralyzing and thereby keep you from learning as quickly as I'm sure you could.
I'm no longer a "young buck" and I can't begin to remember how many mistakes I have made that cost time, money, blood, a couple girlfriends and well you get the idea.
I'm not suggesting that you be wrecklace but getting your hands dirty is a great teacher and mistakes create the lessens we never forget. Many of us began this journey before the Internet existed and might not have had a mentor either.
Toyota writes a pretty straight forward manual and includes very helpful info in the front concerning safety, tool use, and how to use the manual. Have fun...
 
Thank you! I know I just need to hunker down and start tinkering. The thing is:I know there's work that needs to be done, but I don't know enough to identify what.
 
It looks like I live about 30 minutes of you in Alvin. I don't mind helping out on a weekend when I'm not working. I'll PM you my number and we can get together and I'll help you out the best that I can.

I just wanted to add that I do all my own mechanic work (shade tree) and I have welding and cutting equipment at the house. I don't mind helping a fellow mudder out.
 
Last edited:
You can follow my suit and basically take it all apart, then stand there in bewilderment on how on earth it goes back together. During this process you will spend countless hours on the internet searching for what you did wrong and 4 out of your 5 friends that actually can wrench will stop answering their phone.

But in all seriousness see if there is a local club or some guys to shadow when they are working on something.
 
As Skywalk26 has shown, THIS is the "brotherhood" that brings us cruiser fanatics together!!
When I first got stationed here in NC, (1986) I befriended a old-timer that owned a local garage, which was located behind/beside his house. He was a mean bast*** to everyone except me. I don't know if it was because of me being USMC, or him looking at me, and feeling sorry for me!
Anyways, I went over there just about everyday I had off, and weekends too! The wife wasn't thrilled about it, but I enjoyed helping him turn wrenches, weld, and run lathe and such. He taught me all of these things, and I never asked to be payed in any other form. The knowledge I learned from him is beyond anything money could buy!
So my advice would be to find a smaller shop, and see if maybe they need a hand. Be willing to do the "BS" jobs without complaining, and absorb as much knowledge as you can! Good luck!
 
@MKPNG I was having this EXACT problem. I joined Mud around the same time as you.

I never figured out what needed to be done.

I just started fixing stuff and doing PM and the list grew as I got more familiar with the truck. One thing that didn't happen is the thing didn't die.

I was afraid the head gasket would definitely blow or something else catastrophic but it didn't happen. I've only put 1500 miles on the truck in like 10 months though. Its only now getting ready to take over daily driver duty.
 
There is nothing you can not fix on that truck with tools, a way to take pictures, and this website.

1st Step: Do a search of what you are looking to do or solve. Most is already covered.

2nd Step: Take pictures and be methodical when taking something apart. I take pictures of things so I know how it goes back together. Label ziploc baggies with nuts and pieces and number them in the order they came off. Lay parts on a piece of cardboard and you can write descriptions next to them.

We love love love pictures (lotsa extra likes if your female). If you have an issue or judgement call, post some pictures. We hate "I have a noise" and "it's coming from under the vehicle when I drive" and "how much is it gonna cost to fix"

If you have a club or capable Cruiserhead local, stalk them and treat them as thou they just won the Powerball.
Look what 1 hour at the Dealership costs. How does that compare to a few good beers? You get the point.
 
Add your year and model to your signature line as well. That is really helpful. Then every time you post a picture we know what to start researching.
Do you have a copy of the service manual for your year yet?
 
Mud is the ultimate resource, I mean FAQ and some good old fashion search sessions will get you pretty far. Then you throw in locals who are willing to help or even just offer advice and you can get really far.

In addtion to all the other great things people have already offered up.
When I first started I was using other peoples baseline and first time buyer check lists to get the ball rolling.

Invest in a pair of mechanix gloves, or a box of rubber gloves and start getting underneath your rig. Just learn your way around and where things go. Reference mud often if you get confused, and take pictures if you start taking stuff off. Or at the least, label things as you go.

I just recently replaced Powersteering lines on mine and spent more time researching and picking through the engine compartment than I did actually replacing the lines.
Any time spent with your hands on your rig is going to be time well spent.

Confidence boosters like oil changes, fixing window moulding, draining sunroofs etc can help me as well, i like to couple a weekend project with something simple so i can kind of get into the flow of working on my tank before tackling anything big.

This is my first car and I'm sure a few would agree, you can teach yourself how to wrench on these pretty easily.
 
You mention you know something needs to get fixed, but you don't know how to identify it? Generally the hardest part in repair is identifying or diagnosing a problem. It could be pretty overwhelming when first getting into it of course. The forum makes it really easy to ask questions and people can point you in the right (and many times wrong) direction. You might try using google with site:forum.ih8mud.com <search query>. It will search the forum better in my opinion for things.

The Factory Service Manual is a great thing to have and read. It goes over simple maintence items and wear items. As already said, the FAQ is really good too. It goes over a lot of maintence and modifications that people have done.

A short list of things you can easiy do to make your truck drive better and ensure reliability that you might want to look into and are fairly straightforward and well documented here are:

- Oil and filter change
- Air Filter Change (get an OEM/Toyota or Denso filter)
- Spark plugs, distributor cap and rotor
- Spark plug wires if they are original
- Positive Crankcase Ventilation valve (PCV Valve & grommet)
- Clean your Mass Air Flow sensor (MAF)
- Clean Throttle body and check your large intake hose for cracks and/or wear
- Fuel filter sock replacement
- Get a timing light and learn how to check timing
- Coolant flush with new thermostat, replace radiator hoses (Pesky Heater Hose change)
- Lube your U-joints and slip yokes
- Front axle rebuild
- Tie Rod ends, and slightly tighten up steering wheel adjustment screw
- Brake pads and rotors
- Power steering fluid flush

What exactly are you experiencing that makes you think you need to do any work at all? Most this stuff is not even needed, but will make the truck drive better.
 
You can follow my suit and basically take it all apart, then stand there in bewilderment on how on earth it goes back together. During this process you will spend countless hours on the internet searching for what you did wrong and 4 out of your 5 friends that actually can wrench will stop answering their phone.

But in all seriousness see if there is a local club or some guys to shadow when they are working on something.


Perfect. Sums up the beginning of my 80
 
@skywalk26
Wow, thank you! I will be sure to hit you up!
Thank you to everyone!

I know I need to work on my front axle. (Clicking birf. At least that's what I think it is.)
I also am painfully aware of a need to replace my power steering pump. (Currently no power steering, which is a b!+ch)


@jwilliams: I do not have a copy yet. I know I need to get one. what is the difference between the FSM and the Chiltons manual? E-2 military pay, with a wife, and a kid in March, doesn't leave me tonnes of room, an the Chiltons is cheaper. One of the reasons I've put it off for so long.
 
@skywalk26
Wow, thank you! I will be sure to hit you up!
Thank you to everyone!

I know I need to work on my front axle. (Clicking birf. At least that's what I think it is.)
I also am painfully aware of a need to replace my power steering pump. (Currently no power steering, which is a b!+ch)


@jwilliams: I do not have a copy yet. I know I need to get one. what is the difference between the FSM and the Chiltons manual? E-2 military pay, with a wife, and a kid in March, doesn't leave me tonnes of room, an the Chiltons is cheaper. One of the reasons I've put it off for so long.
Alright, lets see if you can at least get you sorted in the FSM area. (pay no attention to the title of that thread ;) )
For Sale: - 40, 50, 60, and 80 series FSM for a hell of a price.

Now what year is your 80?
 
You just have to start.

Learn the basics on YouTube: Transmission, ICEs, fuel injection... whatever.

Pick a thing to fix/replace/read about... that will lead to something else and so on.

I started on my '67 barracuda in 1990 in my dad's barn. That required a lot intuition and "car sense". However, Obd2 (look that up) vehicles are so friggin easy to diagnose and fix as long as you read the manuals, have the tools, etc. That and the quality of the 80 series parts make it far less frustrating than so many other vehicles.
 
Don't be afraid to get in there and get your hands dirty!

Working an vehicles like these are a great place to start. Everything is right where you'd expect it to be and most things are fairly straight-forward to fix. Most common repairs you should be able to find a guide for right here on MUD!

YouTube is great resource as well, specifically EngineeringExplained's channel. Lots of informative content on how all the different systems of a vehicle work.
 
Back
Top Bottom