For OEM bits:
80 Series OEM Lower Knuckle Stud and Hardware Kit
80 Series OEM Lower Knuckle Stud and Hardware Kit (KAN-3)
Knuckle Arm Studs
- Thread starter TomH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Correct PN for the nut is 90179-12021.
Thanking you, everyone!!
- Joined
- Jul 8, 2013
- Threads
- 64
- Messages
- 3,037
- Location
- New South Wales, Australia
- Website
- www.completecruisers.com.au
I note with interest that the new ones have some sort of threadlocking compound on them.
must admit, I am going loctite blue myself, it is not too hard to remove but sticks the bolts well. 53ftpounds for the studs.
Does the above kit come with the loctite'ed studs? Photos show studs with no loctite.For OEM bits:
80 Series OEM Lower Knuckle Stud and Hardware Kit
80 Series OEM Lower Knuckle Stud and Hardware Kit (KAN-3)absolute-wits-end.com
80 Series OEM Lower Knuckle Stud Kit
80 Series OEM Lower Knuckle Stud Kit (KAN-2)
not sure of that kit, but a tube of blue loctite is a worthwhile good thing in the tool kit, goes a long way.Does the above kit come with the loctite'ed studs? Photos show studs with no loctite.
80 Series OEM Lower Knuckle Stud Kit
80 Series OEM Lower Knuckle Stud Kit (KAN-2)
Might click the second link you postedDoes the above kit come with the loctite'ed studs? Photos show studs with no loctite.
80 Series OEM Lower Knuckle Stud Kit
80 Series OEM Lower Knuckle Stud Kit (KAN-2)