pmed you
pmed you
pmed you
Japanese TEQ Collectibles
- Thread starter mot
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
- Thread starter
- #142
RJC,
Thanks for PM-ing me!
I haven't clicked on your PM, but just wanted to let you know that the same guy who has picked up my telephone stand and the round TEQ sign wanted to see what it looked like. So if youre PM is concerning the possibility of purchasing the pencil sharpener, please allow me to wait til I hear from him.
Again, thansk for your PM and interest!
Mot
Thanks for PM-ing me!
I haven't clicked on your PM, but just wanted to let you know that the same guy who has picked up my telephone stand and the round TEQ sign wanted to see what it looked like. So if youre PM is concerning the possibility of purchasing the pencil sharpener, please allow me to wait til I hear from him.
Again, thansk for your PM and interest!
Mot
- Thread starter
- #143
By the way, sending the pencil sharpener would cost either $24 for slow air (3-4 weeks, no tracking, no insurance) or $32 for regular air (2 weeks, no tracking, no insurance).
If that makes you nervous you can opt for EMS(express air: 1 week, online tracking, insured) for an additional cost. But I'm sure you can almost make a pencil sharpener for about the same cost.
If there are any others interested in this shapener taking up your precious real estate on your office desk or workshop bench, please PM me your best shot, ONCE (I don't want to (and don't want you to) go back and forth) and I'll simply let it go for the highest bidder.
I'll leave it completely upto the winner whether to let others know of his/her identity or not.
But I will not disclose the name or the winning amount publicly or otherwise.
If this is not cool with the mods or woody, I'll come up with a hard number on it. (In retrospect, that's probably what I should have done here! :whoops
As always, thanks for looking and your consideration!
Now get them offers coming in!
Mot
If that makes you nervous you can opt for EMS(express air: 1 week, online tracking, insured) for an additional cost. But I'm sure you can almost make a pencil sharpener for about the same cost.
If there are any others interested in this shapener taking up your precious real estate on your office desk or workshop bench, please PM me your best shot, ONCE (I don't want to (and don't want you to) go back and forth) and I'll simply let it go for the highest bidder.
I'll leave it completely upto the winner whether to let others know of his/her identity or not.
But I will not disclose the name or the winning amount publicly or otherwise.
If this is not cool with the mods or woody, I'll come up with a hard number on it. (In retrospect, that's probably what I should have done here! :whoops
As always, thanks for looking and your consideration!
Now get them offers coming in!
Mot
stuff
You got a PM Mot,thanks for sharing all this cool stuff.
John
You got a PM Mot,thanks for sharing all this cool stuff.
John
- Thread starter
- #145
Guys,
A drunk bastid had made me an offer that I could not refuse, so the pencil sharpener is officially sold! (I've been paid for it already!)
Thanks for your interest/PM's!!
I'll let you all know when I come up with another nerdy item!
Mot
A drunk bastid had made me an offer that I could not refuse, so the pencil sharpener is officially sold! (I've been paid for it already!)
Thanks for your interest/PM's!!
I'll let you all know when I come up with another nerdy item!
Mot
- Thread starter
- #146
I know most of you probably don't smoke, but might appreciate this piece of Toyota history (Yeah, tell me if that doesn't sound cheesy! 
)
I kind of enjoyed setting the minimal price and asking for the best offers. So despite what I have said earlier I would like to give it another go.
I think part of the problem is that I set my prices too high and a lot of my stuff end up not selling and collecting dust in my living room.
Anyway, I would let this baby go for $25 O.B.O.
Let me know if you non-smokers would like to have it.
BTW, the front cover says "Toyota Truck 110HP 5 ton load capacity".
The back reads "Toyopet Trucks RK30 1.5 ton load capacity" and "RK70 2 ton load capacity root(?) truck"
.
.
.
On e-bay now!
.
)I kind of enjoyed setting the minimal price and asking for the best offers. So despite what I have said earlier I would like to give it another go.
I think part of the problem is that I set my prices too high and a lot of my stuff end up not selling and collecting dust in my living room.
Anyway, I would let this baby go for $25 O.B.O.
Let me know if you non-smokers would like to have it.
BTW, the front cover says "Toyota Truck 110HP 5 ton load capacity".
The back reads "Toyopet Trucks RK30 1.5 ton load capacity" and "RK70 2 ton load capacity root(?) truck"
.
.
.
On e-bay now!
.
Last edited:
- Thread starter
- #150
For coffee and latte drinkers...
I don't know how old they are, but I believe they were give-away items from Toyota in Japan years ago.
I'm selling this as a pair, so please don't ask me to break them up!
Just in case you were wondering, they are new/never been used, so you can feel good taking your morning sip whether in your car or in your office. Why not get one for you and one for your better half!
Not that you care, but this is what the package says:
Origina Themo Tumbler
-Wash the body and the lid with dish soap in warm water before using it for them for the first time.
-Put the drink that is not scorching hot into the tumbler so when a dumb-ass spills it he (you) won't get burned.
-Do not carry them in a bag, etc... with drinks in them.
-Drink might seep out even with the lid on/closed. BE CAREFUL!!
-They're designed to keep the drinks warm/hot so pay attention before taking your first sip as the content may be super-duper hot even if the outside isn't.
-Be sure to hold the tumbler when putting on/removing the lid, as well as opening or closing the opening.
-Don't burn yourself by opening when the tumbler is not resting on a flat surface.
-Do not put it in a microwave, nor putting it on an open fire, or other cooking device.
-Do not put in boiling, or near-boiling liquid.
-Do not drop or hit it as it might break.
-Do not put it in a fridge as that might damage it.
-Do not put it in a dish washer.
Inside is made of stainless steel and the outside is made of ABS.
It was designed to handle 120℃ of drink in it, while the outer casing would tolerate 70℃. It would only handle -20℃ and -10℃ respectively.
Holds 400ml (slightly smaller than a bottle of pop).
I'm going to be greedy and start out by asking $55, plus $10 for shipping.
Of course, I'll be open to ANY low-ball offers!
Thanks for looking!
Mot
.
.
.
I don't know how old they are, but I believe they were give-away items from Toyota in Japan years ago.
I'm selling this as a pair, so please don't ask me to break them up!
Just in case you were wondering, they are new/never been used, so you can feel good taking your morning sip whether in your car or in your office. Why not get one for you and one for your better half!
Not that you care, but this is what the package says:
Origina Themo Tumbler
-Wash the body and the lid with dish soap in warm water before using it for them for the first time.
-Put the drink that is not scorching hot into the tumbler so when a dumb-ass spills it he (you) won't get burned.
-Do not carry them in a bag, etc... with drinks in them.
-Drink might seep out even with the lid on/closed. BE CAREFUL!!
-They're designed to keep the drinks warm/hot so pay attention before taking your first sip as the content may be super-duper hot even if the outside isn't.
-Be sure to hold the tumbler when putting on/removing the lid, as well as opening or closing the opening.
-Don't burn yourself by opening when the tumbler is not resting on a flat surface.
-Do not put it in a microwave, nor putting it on an open fire, or other cooking device.
-Do not put in boiling, or near-boiling liquid.
-Do not drop or hit it as it might break.
-Do not put it in a fridge as that might damage it.
-Do not put it in a dish washer.
Inside is made of stainless steel and the outside is made of ABS.
It was designed to handle 120℃ of drink in it, while the outer casing would tolerate 70℃. It would only handle -20℃ and -10℃ respectively.
Holds 400ml (slightly smaller than a bottle of pop).
I'm going to be greedy and start out by asking $55, plus $10 for shipping.
Of course, I'll be open to ANY low-ball offers!
Thanks for looking!
Mot
.
.
.
- Thread starter
- #151
Bump before either putting them up on e-bay or sending them to an avid coffee drinker in the US.
BTW, I've got the smaller TEQ tool box up on e-bay now.
Why don't you take a look!
BTW, I've got the smaller TEQ tool box up on e-bay now.
Why don't you take a look!
Awl_TEQ
Supporting Vendor
mot,
How big is that thing, LxWxH ?
Also, back a page or two was those 40 series models - is the unwrapped one still available?
Kevin
How big is that thing, LxWxH ?
Also, back a page or two was those 40 series models - is the unwrapped one still available?
Kevin
- Thread starter
- #154
14.5 x 32 x 5.5 cms (not measuring the latches or the handle).
So that would be close to 5" x 13" x 2.25" -ish.
And I know that the only plastic model remaining ouf of those three is boxed up already, so I'll have to check and get back to you as to which one it was/is.
THANKS!!
Mot
So that would be close to 5" x 13" x 2.25" -ish.
And I know that the only plastic model remaining ouf of those three is boxed up already, so I'll have to check and get back to you as to which one it was/is.
THANKS!!
Mot
- Thread starter
- #155
Mud Flaps...
I don't know what/which vehicle these were originally for, but here they are!
Best offer over $25/pair, plus shipping.
Yes, they're kind of funky (ghey?), but might look cool on a black or whilte 40 or something.
I'll put them up on e-bay if I don't receive a (any) decent offers!
THANKS!!
Mot
.
.
.
P.S. I've listed some NGK stuff that some of you might be interested in.
I need them gone, so if you're even remotely interested, please low-ball me!
I don't know what/which vehicle these were originally for, but here they are!
Best offer over $25/pair, plus shipping.
Yes, they're kind of funky (ghey?
), but might look cool on a black or whilte 40 or something. I'll put them up on e-bay if I don't receive a (any
) decent offers!THANKS!!
Mot
.
.
.
P.S. I've listed some NGK stuff that some of you might be interested in.
I need them gone, so if you're even remotely interested, please low-ball me!
MOT, i JUST NOTICED IN YOUR LISTING THAT YOU LEFT THE "S" OUT OF lAND cRUISER - JUST THOUGHT YOU MIGHT WANT TO KNOW BEFORE YOU GET BIDS, YOU CAN REPAIR THAT AND ATTRACT MORE PEOPLE THROUGH SEARCHES. nICE STUFF BTW - VERY COOL AND SUPER RARE - sorry about the caps...Doh!
aWESOME, i GOT SO MANY JDM PARTS FROM HERE IN JAPAN IT IS INSANE, FEEL FREE TO CHECK MY LISTINGS.
LINK IN SIGNATURE IN CASE YOU CAN NOT SEE IT:
- signed JDM
LINK IN SIGNATURE IN CASE YOU CAN NOT SEE IT:
- signed JDM
Last edited:
- Status