Is this ARB fixable?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 28, 2006
Threads
101
Messages
594
Location
Leesport, PA
I ran across this in the FS section: https://forum.ih8mud.com/sale-parts...fj80-damaged-cheap-albany-ny.html#post3410734

It's hard to tell if it's just the bottom portion that is bent, or if it's affecting the winch area and mounting points. I can do some metal fab, but want to make sure it would still be worth my time. I just don't want to pick it up if it will be next to impossible to make work. Opinions?
 
The bottom part is not used at all for winch mounting. Mine is bent to s*** as well and has no effect on the winch which is mounted to the second opening from the top of the bumper referenced in your post.

Worth the purchase.

-o-
 
Um.. :frown: Did you guys see this photo.. Those Frame Rails are Tweaked bad!

307849144_vL44r-L.jpg


Id say that thing is worth its weight in Scrap Metal.. Thats about it.. ;)

althought i did not want to post that in the guys add.. :D
 
trim the skirt off, plate the insides (except for the winch location), and use it to make smaller rocks. I trimmed mine up, tucked it in 2 & 5/8", and a local fabricator plated the insides for ~$150. Well worth the money in my book. I wish I started out with a bumper like that, I dropped $750 on mine years ago. Now I have better clearance and stronger wings for bigger rocks. :D
lizzard gulch.webp
 
wow, you're right those mounting points are beyond tweaked. I wonder how much of a pita that will be to straighten out. Thanks for catching that. Im not sure if it's worth it now.....
 
that looks pretty farked.............but for the right price ($0) it could still be a deal. We had a local member find a ARB for an 80 that had been hacked to fit a 40. He got it for free and went from there. After the machine shop and a fresh coat of powder, i think he has under 250 in it. the horns were cut off and replaced then appropriate holes drilled.
 
trim the skirt off, plate the insides (except for the winch location), and use it to make smaller rocks. I trimmed mine up, tucked it in 2 & 5/8", and a local fabricator plated the insides for ~$150. Well worth the money in my book. I wish I started out with a bumper like that, I dropped $750 on mine years ago. Now I have better clearance and stronger wings for bigger rocks. :D


Have any more pics of this setup?
 
Post up "Trailbus", I talked with you at lost trail last year about tweaking the ARB. Looks like you got it done so lets see some info.

Jay
 
Use a come-a-long and pull the two horns together if you still want to buy it.
 
trim the skirt off, plate the insides (except for the winch location), and use it to make smaller rocks. I trimmed mine up, tucked it in 2 & 5/8", and a local fabricator plated the insides for ~$150. Well worth the money in my book. I wish I started out with a bumper like that, I dropped $750 on mine years ago. Now I have better clearance and stronger wings for bigger rocks. :D

I say it aint worth it.

Take the purchase price of $300, shipping of.... say $100, new powder coat for say.... $75 (that's cheap too), local fabricator to fix the frame mounts and plate... $100 to 150.

Buy a shiney new one that fits like a glove for almost the same price. :doh:
 
Ya it might not be worth it unless I can get it much cheaper. I have a buddy who can do decent fab work though. Plus, I could probably just spray bomb it vs powder coating. I would probably drive to pick it up, cost me about 50 or so bucks if I tade the TDI. Ah, I just thought it might be a cheap way to get a bumper for the 80. Decisions, decisions.
 
Post up "Trailbus", I talked with you at lost trail last year about tweaking the ARB. Looks like you got it done so lets see some info.

Jay

I didn't notice the frame rails either, wheel & deal & get it for less then "un-tweek" it. I'll get some picks of my bumper up tomarrow. I moved it in so what used to be the front hole mount under the frame became the rear hole & drilled a new front one. Trimmed the whole inside edge and shortened the wings.

Greg
 
aye, thanks for the heads up, looks like I will have to pass on this one. Oh well, there are better looking bumpers on the market anyway.
 
Back
Top Bottom