Introductions (2 Viewers)
- Thread starter rusty_tlc
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yeah, Rubithon is the 18th -22nd and I have gone for the last 10 years. I usually go on the thursday morning run that was a breakfast run until this year. This is a really great time and there are so many of cruisers that go..It is good to get ideas for upgrades and there are always great people that go....anybody from the club interested let me know?
I am going to try to go on the Rubithon. If I get my rig done
Hey, guys! Officially throwing in the 'Hey, I'm here, and I'm addicted!' post....
Owner of an '84 FJ 60, SUA on 4.5" Alcans, w/35"s. A few cool little mods here and there, and a brand-spanking new winch bumper from Blazen Off-Road up in S. Lake. Hope to see everyone at the meeting next tuesday...
Cheers!
Cruiser porn incoming:
Owner of an '84 FJ 60, SUA on 4.5" Alcans, w/35"s. A few cool little mods here and there, and a brand-spanking new winch bumper from Blazen Off-Road up in S. Lake. Hope to see everyone at the meeting next tuesday...
Cheers! Cruiser porn incoming:
Last edited:
Hey, guys! Officially throwing in the 'Hey, I'm here, and I'm addicted!' post....
Owner of an '84 FJ 60, SUA on 4.5" Alcans, w/35"s. A few cool little mods here and there, and a brand-spanking new winch bumper from Blazen Off-Road up in S. Lake. Hope to see everyone at the meeting next tuesday...
Cruiser porn incoming:
So Scott: Where's the darn pics anyway?
Edit: I just saw the pics of the new lift and front bumper in the 60's section: Look'n good! So when are you going to come out on a run with us?
rusty_tlc
Dain Bramaged Member
- Thread starter
- #47
Hey, guys! Officially throwing in the 'Hey, I'm here, and I'm addicted!' post....
Owner of an '84 FJ 60, SUA on 4.5" Alcans, w/35"s. A few cool little mods here and there, and a brand-spanking new winch bumper from Blazen Off-Road up in S. Lake. Hope to see everyone at the meeting next tuesday...
Cruiser porn incoming:
Welcome!!!!
Lets go wheeling.
OK my name is Wolfgang (wolf), I have a 71 fj40 and soon will get my 85fj 60 back from my daughter in lost wages, any hoo, I am considering a job offer in Reno and wanted to get a local's point of view..
so how about it? what are the pro's and con's of the "biggest little city inthe world?"
how are the schools? I have a 8yr old
what areas should I look for/avoid for housing? I'm looking to rent for a few months and then purchase when my property here sells
hows the Wheeling?
Thanks
so how about it? what are the pro's and con's of the "biggest little city inthe world?"
how are the schools? I have a 8yr old
what areas should I look for/avoid for housing? I'm looking to rent for a few months and then purchase when my property here sells
hows the Wheeling?
Thanks
Hi Wolf! Great wheeling; I doubt if you'll want for more wheeling opportunity. No state income tax. Reasonable property taxes. Liquor in the grocery stores
, 4-seasons..."winter" can last 6-weeks or in some years 6-months; real estate is not cheap to buy; utilities are on the high side. Everyone has their own opinion on where to live in the area. Spanish Springs (Northern Reno/Sparks area is good but traffic jams back and forth to Reno during peak hours will kill you. South Suburban Reno ("Double Diamond"/"Damonte Ranch" developments are good values right now. Unless you like earthquakes I'd avoid the Northwest area of Reno.
The public schools are average. Personally I think the parents have more to do with what a kid gets out of any school than the school/school system itself.
Come to one of our meetings and introduce yourself: We'd all like to meet you.
Dan (one of the Dans...)
Hey, guys! Officially throwing in the 'Hey, I'm here, and I'm addicted!' post....
Owner of an '84 FJ 60, SUA on 4.5" Alcans, w/35"s. A few cool little mods here and there, and a brand-spanking new winch bumper from Blazen Off-Road up in S. Lake. Hope to see everyone at the meeting next tuesday...
Cruiser porn incoming:
Yeah,
Scott's got the bug BAD!
He even has a schnazzy landcruiser key chain!
He's done a REALLY nice job on his rig thus far and has more plans yet to come it sounds like!
The bumper is BEEF!
He does need to get out and get some wheelin under his belt.
Hate to see a rig built like that be a pavement punder!
K
Hey Wolf!
Im a Chicago native and I LOVE it here, though I could do without winter all together.
I live in S. Reno (Damonte Ranch) and LOVE it. Its quiet, traffic isnt too bad and its close to everything you need with the exception of NAPA auto.
Great fishing, hunting and 4 wheeling.
Keith
Thanks Dan, Keith,
I took the job and will be headed out there in a couple of months, I'll hook up with you guys at the club meetings ( should have a running cruiser by then"
mean time I'll just lurk around on the Forum.
I took the job and will be headed out there in a couple of months, I'll hook up with you guys at the club meetings ( should have a running cruiser by then
" mean time I'll just lurk around on the Forum.
DesertLake
SILVER Star
Thanks Dan, Keith,
I took the job and will be headed out there in a couple of months, I'll hook up with you guys at the club meetings ( should have a running cruiser by then
mean time I'll just lurk around on the Forum.
What part of town will the new job be in?
rusty_tlc
Dain Bramaged Member
- Thread starter
- #54
Rubicon is an hour SE of us and Fordyce is an hour NE of us, I'd say the wheeling is pretty good.
There are also a ton of trails in the Sierra, and more in the Virginia range. Average would be a kind description of the schools here. You will need to be very proactive about your child's education.
I live around the corner from Chicago, it's a nice neighborhood and there are some good values there right now. In addition to the housing in the Reno metro area there are a lot of decent houses in Fernley which is an easy drive from Reno to the east. I work in Sparks and about half the people here commute in from Fernley.
Looking forward to seeing you at one of the meetings or on a Trail Run.
Dan (Yes another one
, I think the Dan count in the club is at four or five now.)
I work for Laser Exhibit Services, we set up trade show exhibits, so I guess mostly at the convention center, hope to have lots of time for the cruisers
I guess I need to get serious about building one or the other for the rubicon, since its that close.
Gladdameechu
Hi! My name is Whit. I went to the meeting on 5/13/08 and kinda sat and mostly listened. Seems like a lot of great guys with a pile of knowledge and I'm looking forward to meeting/getting to know/wheeling with all of you.
I'm basically from Reno. I bought a '73 FJ-40 last October, rescued it from Modesto....had some decent mods when I bought it, spring over, shackles, hi-steer, 33s, 350 w/ turbo 400 tranny....but also some problems...super squirrely on the road, mystery electrical short, overheat.......spent most of the winter fixing those things, adding: oil & tranny coolers, new radiator, painless wiring harness, shims to adjust camber, gate shifter (to replace slap shifter....anyone want the old one?)....and basically have been back on the road about...oh, one week.
I don't know all that much about cruisers, except that I've liked them since I was a kid and couldn't wait to get my first one....fer example, I have knobs that I have no idea what they do (did someone say "sounds like a personal problem?")...don't know my gear ratio, kinda embarassed by some of the chrome on the rig (I'll replace it when I break it)....etc. Also interested in adding a few new mods, including: air lockers, some armor, a spare tire, gear/tool rack.....would appreciate any comments or suggestions.
Anyhow, I look forward to learning what you know and having some fun. BTW, one of the Dans wants to spec my spare gas tank....just lemme know and we can pull it out on a weekend...no prob.
jumping for joy.
Whit
Hi! My name is Whit. I went to the meeting on 5/13/08 and kinda sat and mostly listened. Seems like a lot of great guys with a pile of knowledge and I'm looking forward to meeting/getting to know/wheeling with all of you.
I'm basically from Reno. I bought a '73 FJ-40 last October, rescued it from Modesto....had some decent mods when I bought it, spring over, shackles, hi-steer, 33s, 350 w/ turbo 400 tranny....but also some problems...super squirrely on the road, mystery electrical short, overheat.......spent most of the winter fixing those things, adding: oil & tranny coolers, new radiator, painless wiring harness, shims to adjust camber, gate shifter (to replace slap shifter....anyone want the old one?)....and basically have been back on the road about...oh, one week.
I don't know all that much about cruisers, except that I've liked them since I was a kid and couldn't wait to get my first one....fer example, I have knobs that I have no idea what they do (did someone say "sounds like a personal problem?")...don't know my gear ratio, kinda embarassed by some of the chrome on the rig (I'll replace it when I break it)....etc. Also interested in adding a few new mods, including: air lockers, some armor, a spare tire, gear/tool rack.....would appreciate any comments or suggestions.
Anyhow, I look forward to learning what you know and having some fun. BTW, one of the Dans wants to spec my spare gas tank....just lemme know and we can pull it out on a weekend...no prob.
jumping for joy.Whit
rusty_tlc
Dain Bramaged Member
- Thread starter
- #57
Hi Whit, thanks for coming to the meeting.
I think we can help you with your knobs, that didn't sound good did it?
I think we can also help you spend money on mods, we are here to help.
I'm the Dan that was eyeing your aux tank, they usually call me Rusty Dan or just Rusty.
Watch this forum for trail runs, your more than welcome to join us on any run.
I think we can help you with your knobs, that didn't sound good did it?
I think we can also help you spend money on mods, we are here to help.
I'm the Dan that was eyeing your aux tank, they usually call me Rusty Dan or just Rusty.
Watch this forum for trail runs, your more than welcome to join us on any run.
Thanks,
I'll probably ease into it.....it's been awhile and I need to improve my technical driving skills b/4 I follow you guys into Fordyce....but soon enough, huh? Also, for those of you who were eyeballing my 40, if you saw anything wrong, weird, ass-backwards, likely to break or dangerous.....please feel free to say so.....
Thanks, and looking forward to a run...
Whit
I'll probably ease into it.....it's been awhile and I need to improve my technical driving skills b/4 I follow you guys into Fordyce....but soon enough, huh? Also, for those of you who were eyeballing my 40, if you saw anything wrong, weird, ass-backwards, likely to break or dangerous.....please feel free to say so.....
Thanks, and looking forward to a run...
Whit
Hello all, my name is Chris and I am new to the Cruiser business. I live in Fallon and soon I will be a member of the TLCA and hopefully Battle Born Cruisers. I have had my 40 now for almost 4 months and I am terribly addicted. I have always wanted a 40, but never had the pocket to get one until I happened across a screaming deal...(IMO). I have been a Toyota guy all my life, owning a small fleet of mini trucks to 4Runners and also a 93 YJ.
Now to my rig. I am the proud owner of a 1972 FJ40. It is mostly stock, the only thing it had aftermarket when I bought it was a header. since owning it I have installed an OEM roll bar, cb with external speaker, painted it tan, 31x10.50's, jerry can mount, cherry bomb muffler, and I have started the process of trimming body fat that has been attacked by rust from Montana.
Future mods include: 4 inch lift, 33's, Aussie in back, lock rite in the front and a set of 4.88's, custom built sliders, full cage, jeep or raider back seat, discs in front, relocating tail lights, winch and a soft top. There are plenty others in store, but I guess all of them will come in due time and when my wallet and
allows it.
Thanks for all the ideas on Mud and looking forward to seeing you guys at a club meeting shortly.
Chris
Now to my rig. I am the proud owner of a 1972 FJ40. It is mostly stock, the only thing it had aftermarket when I bought it was a header. since owning it I have installed an OEM roll bar, cb with external speaker, painted it tan, 31x10.50's, jerry can mount, cherry bomb muffler, and I have started the process of trimming body fat that has been attacked by rust from Montana.
Future mods include: 4 inch lift, 33's, Aussie in back, lock rite in the front and a set of 4.88's, custom built sliders, full cage, jeep or raider back seat, discs in front, relocating tail lights, winch and a soft top. There are plenty others in store, but I guess all of them will come in due time and when my wallet and
allows it. Thanks for all the ideas on Mud and looking forward to seeing you guys at a club meeting shortly.
Chris