Introducing Two-Socks!! LR Interloper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 13, 2007
Threads
3
Messages
16
Hi Folks,

Am normally a Toyota guy...Have a 4-runner and Sequoia. But I fell in love with a 94 LR Defender (AKA money pit).

The diffs. on Defenders are crap (mine just blew), and consequently they have designed a "Toyota kit"using the diffs..I think from an FJ80, and adaptive parts from "Rover Tracks"in Longmont.

I'd like to upgrade to Toyota diffs but am looking for an affordable source. Do you folks know of any great sources? Even dealer parts at a discount. Used parts in like-new condition?

<Three bows to the Shauman>

Thanks folks,
Bob AKA Two-Socks:o
 
You mention Longmont.. are you in the Denver area? If so you need to contact Irbis Offroad in Aurora, they part out quite a few axles and probably have what you're looking for on the shelf. They've got a banner ad up top, probably some threads in the vendor section. hth..
 
As I recall, the Toyota 8" diffs are being used by Rover guys as replacements. The 8" was on the rear of 4WD mini-truck from 1979-1995, 4Runner rear from 1984-2001, and mini-truck and 4Runner front until 1985 (this is the front solid axle, not the IFS). I presume the Land Cruiser front hi-pinion diff will work as well since it's a bolt-in swap for the other 8" diffs.

When I had my Rover, people were starting to drill and tap the Rover housing for the Toyota bolt pattern. Of course, you still need yokes to mate up your driveshaft, and custom axleshafts.

Keith (?) at Rovertracks really knows his business, I would not hesitate to work with him. As for the Toyota diffs, you should be able to find open diffs w/ stock gears all day long in junkyards, or on the various Toyota boards.

Your gear ratio choices are 4.10, 4.30, 4.56, 4.88, 5.29, 5.71 (the first four are factory ratios). You just need to be careful of what you're buying re: ratios, many junkyards have no idea but all of the shops and *most* private owners know what they have.
 
Hiya folks,

Yes, I live in S.E. Aurora. Actually drooled all over Romer's tricked out LX for about three days, then left him a note. That's how I was invited to the board.

The sources for parts, advice on ratios etc., are very much appreciated.

Hey...Sir Romer, Trade ya straight across for your LX!! :grinpimp:
(Think I know the answer to that...)
 
There are a couple rover guys on here. Search the names: Discyota and DiscoDino

Dave
 
I always thought a LR (Defender or Disco) with FZJ80 drivetrain and electrics would be a great truck. The one disadvantage my 80 has on the local trails is its size. The Disco has a really nice interior, and the body is a good size for wheeling tight trails.
 
Irbis off road is two blocks from the office. I would contact them.

No deal on the trade
 
Hehe...I feel the love... :D

Wish my Defender had its current body...And everything else Toyota.

Anyway, looks like I can use an FJ80 front diff and Tacoma/4-Runner rear diff. Not positive...Haven't heard from Rover Tracks yet. Thanks for the source, Ken.

You guys have me thinking about an LX/FJ again...:idea:

Irbis off road is two blocks from the office. I would contact them.

No deal on the trade
 
Hehe...I feel the love... :D

Wish my Defender had its current body...And everything else Toyota.

Anyway, looks like I can use an FJ80 front diff and Tacoma/4-Runner rear diff. Not positive...Haven't heard from Rover Tracks yet. Thanks for the source, Ken.

You guys have me thinking about an LX/FJ again...:idea:

The Tacoma is a different truck than the mini. Mini's were available 1979-1995. They all had 8" rear diffs (actually 7.8").

The Tacomas with open differentials have an 8.4" ring gear that IIRC won't work in your housing. However, Tacomas from 1995.5 through 2004 with the rear electric locker use the same diff as the minis, the 8".
 
The Tacoma is a different truck than the mini. Mini's were available 1979-1995. They all had 8" rear diffs (actually 7.8").

The Tacomas with open differentials have an 8.4" ring gear that IIRC won't work in your housing. However, Tacomas from 1995.5 through 2004 with the rear electric locker use the same diff as the minis, the 8".

Just for reference, the e-locker 8" is not the exact same housing as the open 79-95 8" pumpkin; some modifications need to be made to the axle housing to make the e-locker fit. Also, the 79-95 diffs are slightly different between 4-cyl and V6 vehicles. You should plan on using aV6 housing, as they are beefier and just as common.

Here's the best link out there on the subject:

http://67.122.16.97/carterman/4runner/mods/locker/
 
Doh!

Man, you're making me miss my 94 D-90.....good old #1009, sniff-sniff.

After 1 year of ownership I'm loving my 97 '80 though, and my garage floor definitely doesn't miss the constant various oil leaks.

What do you call a Land Rover that doesn't leak oil?-----(Wait for it)-----Empty.
 
Just for reference, the e-locker 8" is not the exact same housing as the open 79-95 8" pumpkin; some modifications need to be made to the axle housing to make the e-locker fit. Also, the 79-95 diffs are slightly different between 4-cyl and V6 vehicles. You should plan on using aV6 housing, as they are beefier and just as common.

Here's the best link out there on the subject:

http://67.122.16.97/carterman/4runner/mods/locker/



This is a pretty complete write-up on this swap in a Disco: http://www.pirate4x4.com/forum/showthread.php?t=367387


Pictures posted below show a 4cyl third with a cut out factory E-Locker flange bolted on, the differences are easily visible and a minor amount of work if you are already drilling a Toyota third pattern on a LR housing.

Additionally it not difficult to bolt in a non E-Locker third for getting your rig off of the trail, mine has made it 300+km with a pop can patch siliconed in.

HPIM1020.JPG


HPIM1023.JPG
 
Back
Top Bottom