Intro + pics

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 20, 2006
Threads
190
Messages
5,887
Location
calgary
Hello, ive been on the site for quite a while though mostly been over in the 60's section. However we got a 92 fj80 about a year back and ive been slowly posting a few questions here and there as ive been working on it and getting it in shape. Well today i got the OME lift in and a few more bugs out of the engine so i thought id post an intro with pics and a few details.

Well, here it is next to my 60, i rearended a ford earlier this year, thus the missing bumper and beat up front end. A few months ago i got a TBI SBC that was rebuilt with 500km's on it and swapped it into the cruiser.
IMG_6744.webp
IMG_6739.webp
IMG_6740.webp
 
Thanks NLXTACY

A couple more pics, heres one of the engine compartment, you can see the amsoil dual remote filter on the right. I havent plumbed the hosing to the engine yet as i want to give it a few more kms of break in miles first.
Also a picture of the console, i added a temp/oil pressure/volt gauge and a tach after the SBC swap.
In the back of the cruiser ive added a Fire extinguisher (i was worried about leaky injectors on the 3FE, also added the first aid kit which covers the side compartment to hide filters and such.
IMG_6741.webp
IMG_6737.webp
IMG_6745.webp
 
I dont plan to off road the cruiser too hard, thats what the 60's for, I plan on building a front bumper myselfs, but because i already have a devoted off roader it may not include a winch on it. I am planning going to bigger rubber, it has yokohama geolander at's at the moment, but i would like to go to a 35, as it will be more of a on road explorer than off, it may get a 17 or bigger size wheel (been debating about 20's with a 35 tire but a little scared to admit it). But thats not in the imediate budget at the moment.
However i am debating running a computer hook up and maybe an old laptop or palm pilot with a realtime diagnostic program like this one: OBD Diagnostics, Inc. - GM OBD1 Cables
It would work kind of like scangauge but on pre obd2 setups.
 
Hey CODY can you take a close up of the AMSOIL install. I am days away from doing this install and I would love some alternatives to Slee's install which is the only one I have ever seen. Any chance you did a write up on the install? :D
 
Hey CODY can you take a close up of the AMSOIL install. I am days away from doing this install and I would love some alternatives to Slee's install which is the only one I have ever seen. Any chance you did a write up on the install? :D
No write up, as i havent actually plumbed it in yet, i just have the hose looped around so i dont get crap in there. As i said im gonna give it a few more km's to break the engine in first.
Anyways... heres some pics....
IMG_6746.webp
IMG_6747.webp
IMG_6748.webp
 
That is such a good location. Plus I could use that inner fender bracket as my CB antenna mount as well. Very cool. Love your engine swap. It would be a nightmare to attempt it living in California :(
 
i rented a garage for a couple month and did almost all of the work on the engine myself in the evenings and weekends. Unfortunatley i had problems with marks adapter and brought it to a shop to get that sorted and they took forever to get around to looking at it. Problem turned out the spacing for the adapters didnt work out. Was a PITA to figure out without any help substantial help from advanced or marks.

I think it could be done if you have the space and time. But it does take up a lot more of your budget in the small things than you would expect.
 
Nice into. Welcome to MUD :flipoff2:







































































:lol: :lol: :lol:




:doh:
 
Are you running the Toyota trans behind the SBC?


Dynosoar:zilla:
 
Are you running the Toyota trans behind the SBC?
Dynosoar:zilla:

yup, it sounds like i would have been better to go with a gm tranny. oh well, i swapped the fluid for amsoil synthetic when i put the motor in, and will try and do this more often to help the tranny holds up. As well i may pick up a spare used one from someone else and either try and rebuild it or hold onto to it in case the stock one does go. Ive already redone the front and rear ends, so thats probally the only major weak link. Now its just a matter of trying to take it easy on the skinny pedal till the motor is properly broken in.

I wonder what RPM's i should keep the 94 SBC at for how many KM's to give it a proper break in? Im gonna have to just let the wife drive it for a few more months.
 
DARN IT! I can't mount the AMSOIL kit there. I have the pesky ABS unit right there! Boooo!
 
Back
Top Bottom