Intoduction (and question)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 1, 2007
Threads
4
Messages
9
Location
Halifax, Nova Scotia
Greetings. I am a new participant and prodigal son (I was once a regular on the TLC mailing list). At that time I was rebuilding a '74 FJ40, now gone these many years to a new home. I now have a 1990 JDM HDJ81 VX Limited w/AT, a new experience for me. I had no idea what was missing. It's like driving a train!

I have a question. If there is someone out here that can help, I would be greatly apreciative. I am trying to determine if there is a speed sensing circuit on my truck. At first I thought not, since there is a cable running the speedometer. After sliding underneath however, I see what is apparently a set of wires attaching at the speedo drive on the transmission. I don't know what this could be other than a speed pulser. Does anyone know? In any case, the wiring is in a factory cover at that point, so I can't see what color lead I should be looking for under the dash. Assuming this is a pulser, does someone know what lead I should be looking for and where?
 
Welcome. I don't know the answer to your question but I am sure someone here can help you. Pictures always help if you have any.
 
Is the FSM for that vehicle one of the FSM download options? Search for the FSM download thread and check it out. That might give you a good source for this and other questions. Wish I knew and could just tell you. Good luck!
 
Greetings. I am a new participant and prodigal son (I was once a regular on the TLC mailing list). At that time I was rebuilding a '74 FJ40, now gone these many years to a new home. I now have a 1990 JDM HDJ81 VX Limited w/AT, a new experience for me. I had no idea what was missing. It's like driving a train!

I have a question. If there is someone out here that can help, I would be greatly apreciative. I am trying to determine if there is a speed sensing circuit on my truck. At first I thought not, since there is a cable running the speedometer. After sliding underneath however, I see what is apparently a set of wires attaching at the speedo drive on the transmission. I don't know what this could be other than a speed pulser. Does anyone know? In any case, the wiring is in a factory cover at that point, so I can't see what color lead I should be looking for under the dash. Assuming this is a pulser, does someone know what lead I should be looking for and where?

First off, welcome to the addiction! :flipoff2: (official 'mud welcome)

Why are you looking for the wire/cable? Is your speedometer not working? I think we might be able to give you some more answers if you can tell us the model number of the auto trans you have. In the picture below, the A343F is the transmission model (K292 is the locker code). Let us know what you've got! and post some pics of the truck. :cheers:

P.S. (I'll be in Halifax at the end of the month, so if you see someone checking out your truck or randomly waving at you, it's probably me!)
80 Series Data Tag.webp
 
Isn't the speedo output one of the inputs into the electronically controlled transmission for shift points and such?
 
Sorry for the delayed response. I was away for a bit. The reason I am looking for the speed sensor lead is to tap into it for a nav unit. As EricG mentioned, it probably does connect to the AT control, or possibly the cruise control. The problem is, I don't know what color wire I am looking for or how to ID it without knowing the color. Here are 2 pics, my truck, and the speedo drive.
new old truck.webp
speedo drive.webp
 
That's it all right.

The sensor has a foot or two of wiring as part of it; the connector is probably sitting on top of the tranny somewhere. Just follow the wiring and you'll find it. Sure sounds like you're going to need to get a set of wiring diagrams for what you're trying to do though.

Oh, and not that it matters for what you're doing, but I'd be surprised if you had an electronically controlled tranny. Does it have an ECT button? And if not, does the tranny shifter have positions L, 2, 3, and then D?

Curtis
 
Thanks Curtis. I will chase that wire today. It is the last connection I need to make. I am going to get a complete bench manual for this truck ASAP. I have tha Toyota engine manual.

The tranny is electronically controlled. It shifts based on speed and throttle position. It makes for a bit of an abrubt shift at times (when the CPU says shift...the tranny shifts...right now).
 
The tranny is electronically controlled. It shifts based on speed and throttle position. It makes for a bit of an abrubt shift at times (when the CPU says shift...the tranny shifts...right now).

Check that the fluid level is not too high and check the adjustment of the "kickdown" cable (from the throttle body to the tranny). You shouldn't have to put up with overly abrupt shifts.

Like 96r50 asked, what's your tranny code? I really would like to know.

Curtis
 
Does the cruise control in a 94 work off of the speedometer cable/speed sensor pictured? I am doing a diesel conversion and am wondering what I am going to have to do for my cruise control to work. If it works off of the speed sensor pictured would it would work with my diesel?
Rusty
 
There is a speed sensor wire which is also needed when installing speedometer correction systems such as the Truspeed unit. Here is a link to an install for that with pictures of how to find that wire...once you get your wiring diagram you can confirm that the wire is the same on a JDM truck:

http://www.sleeoffroad.com/technical/tz_truspeed.htm

scroll half way down for pics...
 
Back
Top Bottom