If it’s worth doing wrong...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

65swb45

Elder Statesman
SILVER Star
Joined
Apr 14, 2004
Threads
1,521
Messages
37,613
Location
818-953-9230
Website
marksoffroad.net
It must be worth doing wrong...TWICE!

Overhauling a customer’s front axle, found an extra long aftermarket bolt on the right caliper. Four washers stacked on it, because obviously the PO owned neither a hacksaw or a die grinder. :rolleyes:
When I went to tear down the left side: SAME THING!
7AEA8377-D51C-432A-8D5A-DC05593B512D.webp

6D6D4794-613E-4C50-A81C-E4062F7C5DBE.jpeg
 
Last edited:
Ordinarily, I wouldn’t post something that is relatively minor. But THEN, I opened up a carb box from @Toyo_Judson and saw something I’ve NEVER seen in 34 years of rebuilding Aisan carbs: somebody ground off the supports that span the Venturi from not one but BOTH emulsifiers!
9482B67A-940C-469D-A553-4EC8DB6D159E.jpeg
 
Fortunately, I have some extra emulsifiers in a box of Cruiser Karma parts gifted to me from people like @Pighead and @Bossman and @greenfox to use on just such occasions, so replacement with the proper components won’t cost Justin anything.
 
Last edited:
Fortunately, I have some extra emulsifiers in a box of Cruiser Karma parts gifted to me from people like @Pighead and @Bossman to use on just such occasions, so replacement with the proper components won’t cost Justin anything.
Well a HUGE "Thank you" needs to go out to @Pighead and @Bossman! And you of course for helping to get the Love Bug, the Land Cruiser and I back on the road!
 
Back
Top Bottom