how worn is too worn?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 13, 2017
Threads
21
Messages
90
Location
Eastern Pennsylvania
I'd like to rebuild my knuckles during this lock-down. I've got time and space and tools. I even have printed out Mud's best rebuild how-tos. I haven't started digging in or ripping anything apart or ordering parts yet.

What I really what to understand is when to replace the birfield vs just rebuild with the the guts that I've already got. What about the axles? I don't really know what "worn out" looks like as pretty much all of my truck qualifies for "worn out".

I can tell you that on 90 degree turns I hear a distinctive clicking and I'm pretty sure it doesn't matter if it's a right or a left turn. This makes me think the joint is prob in need of replacement.

Any insight ya'll might have for me would be appreciated.
 
If you're in a pinch you can swap the birfs from side-to-side and get some more life out of them. As long as your drive flanges are the long style (I think 94 is) the other things are pretty durable.
 
You really can't tell anything until you get inside. Once you get the Birf out and get the thing completely apart, you will see the groves, if any that have been worn into the main cup. They will be very easy to see and feel with your finger if there is a new grove worn into them. The other possible worn out part may be on the spindles. They get worn down from running with loose wheel bearings. That is also easily identified by taking a brand new bearing out of the box, and sliding it on to the spindle. If there is a bunch of slop, then obviously No Bueno. Also, if there is a grove beat into the spindle, that grove will not be allow bearing to move freely, and the correct preload position can not be achieved.

Sorry, not really an answer you were looking for. You have to get dirty to find out.
 
Last edited:
If the Viscous coupler is binding up, the birfs will bind BADLY as it's the same as locking the CDL (almost) I thought mine were junk until I removed the VC then clicking 95% GONE.
 
If you're in a pinch you can swap the birfs from side-to-side and get some more life out of them. As long as your drive flanges are the long style (I think 94 is) the other things are pretty durable.
What is meant by a long style drive flange?
 
Early 80 series had a shorter Birfield CV joint (stub shaft with shorter length of splines) and a shorter (not as thick) drive flange. Toyota then upgraded that part to a longer stub shaft (longer splines for more engagement) they also increased the thickness/depth of the drive flange to match. I don't recall the exact dates that change happened, somewhere around early 94?? The experts will chime in, been discussed in the past, try a search.

CaptKevman: try some searches for Front Axle Service; been hundreds of threads on the subject, Read on that topic in the FAQ section under Maintenance. Check Youtubby for a OTRAMM video on FZJ80 Front Axle Service to get a visual on how it all goes together.
 
Last edited:
Understood thanks very much. New of this variant but in this much detail. Switching birfs on the same truck should work out though, right? Say my 91 for instance, there is nothing different form left to right. correct?
 
If the Viscous coupler is binding up, the birfs will bind BADLY as it's the same as locking the CDL (almost) I thought mine were junk until I removed the VC then clicking 95% GONE.

My VC was toast and my birfs clicked constantly in turns. Pulled my VC and swapped my birfs from left to right and have not heard a peep out of them. Have not been off-road and locked so I still don't know for sure.

You should be able to swap yours from side to side. Echo what others have said, you may want to tear them all the way down to see what the bearing surfaces look like once you get the balls out.
 
Back
Top Bottom