how does a TJ rear seat attach?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 2, 2002
Threads
68
Messages
1,372
Location
New Hampshire
I bought a TJ rear seat yesterday. It was taken out of the rig the day the guy bought it in 2003. Anyway, looking in the back of the TJ all I saw were things that looked remarkably like the footman loops that you use to hold the straps on a bikini top. They were riveted to the floor, and I can understand the guy not wanting to take them out. I also saw two bolted in hook type things right at the back, and I took those out. But i'm not sure if these have anything to do with the seat or not. The guy didn't remember, and the truck had a huge sub box in it, so I couldn't put the seat back in to see. But does front of the seat just attach to those loops?
 
Thanks trollhole, but that's actually not like the stock seat on the bottom. I was actually going to buy one of the aftermarket fold and tumble seats myself, but my front seats are the plain black vinyl super seats, and the TJ rears are only available in the textured denim vinyl. So to get them to match (yeah i'm that picky) I knew I was going to have to have it recovered anyway. Mine has two hooks at the front, attached with a big spring loaded pivoting thing, the forward hook is released by pulling on a bar, so the seat can come out. There is a single hook on each side in the rear, which release when you pull the handle at the top middle of the seatback and fold it forward. I'm pretty sure it attaches to the loops that were riveted to the floor of the TJ, but they looked pretty small, it just doesn't seem very substantial. Of course it is from a jeep.
 
I've got a stock TJ seat. I used those two brackets in Trollhole's pictures that are on the right side of the picture. Those bolt to the floor and the seat has pins in the front that go in the holes in the top of the brackets. The rear of the seat just sits on the floor.
 
This is weird. They must have changed the design or something. I'm sure I can get it in there with some loops properly attached to the floor. the little things on the floor in the TJ must have been what it attached to. It latches like a door striker on all 4 corners. I wish I had a digital camera I would post a pic. I'm not full of crap, honest.
 
LOL.. I believe you! I have a pair of those things too. When I got the seat, the owner couldn't remember how it mounted so I just gave me a pile of brackets.

If you need some, I'm sure you can post on to some local Jeep board and someone will have some.
 
ken_79-fj40 said:
This is weird. They must have changed the design or something. I'm sure I can get it in there with some loops properly attached to the floor. the little things on the floor in the TJ must have been what it attached to. It latches like a door striker on all 4 corners. I wish I had a digital camera I would post a pic. I'm not full of crap, honest.

There are two different versions of the fold and tumble back seat for the TJ. One way to tell is if the release to fold the seat forward is located at the top of the seat back in the center. If your back seat has this design it is the newest version and will not work with the first generation flod and tumble mounting points. The early versions have a metal release arm that sticks out toward the back from the seat bottom on the lower left corner that you release to fold the seat forward. The early version has a pin on each side at the front of the seat bottom that slides into upright mounting brackets that are attached to the rear fenderwells.

From what you are describing and it coming out of an 03 I am positive you have the newer version and it attaches to mounting points on the floor, not brackets on the rear fenders.
 
Last edited:
I spent some time yesterday afternoon looking at TJ's on ebay. And sure enough, there are supposed to be 4 brackets bolted to the floor. The guy I got the seat from is going to see if he still has them, but it's doubtful seeing as how the seat has been moved several times since 03. But looking at it I figured out how to make my own brackets pretty easily. So I plan on making my own, and mounting the seat an inch or two higher, so I can put my 1/2 door uppers underneath it.
 
Back
Top Bottom