HF2A transfer case details

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 6, 2007
Threads
1
Messages
1
Location
Portland, Oregon
I bought my '96 FZJ80 this year, and quickly added ARB air lockers, Old Man Emu Suspension and a safari rack. I love this truck, but I am committed to alternative fuels (biodiesel for me!), and I want to do a diesel conversion. I've studied all the options I can find (Cummins 4BT, Toyota 1HD-T, Chevy 6.2l etc). The one option that intrigues me most is using a 2.8 CRD diesel from a Jeep Liberty. I need to fabricate an adapter between the Jeep (Dodge) 545RFE 5 Speed overdrive transmission and the HF2A (HF2AV?) transfer case in the Toyota. So, here's the question:

Does anybody know the specifications for the input shaft on the Toyota transfer case? Diameter? # of splines?

Does anybody know of someone who already makes this adapter, or might be capable of fabricating one?
 
Looks like Izuzu diesel is in the running as a replacement for the underground Toyota HZ in the US market in order to meet Tier Three Emmisions Standards.

Spoke with a local product manager yesterday about the R&D process, they are sourcing adapters for both manual and an automatic tranny.

Will visit them often and reply with progress report if you are interested.
 
96 have visco coupling .. ? I thought no .. in this case it's a HF2A .. but anycase the same front bolt pathern and input shaft ...

I vote for 4BT .. there are several well done swaps ..
 
I was in the same situation as you, I bought a 94 with the intent of a diesel conversion. I originally was thinking Toyota but eliminated that after several weeks of not being able to find one under $8-10,000. My next thought was 4BT but decided against that because I didn't want to go with a 4-5" lift and they are a bit loud. I was convinced to go with the Isuzu swap and thought I found a good deal on an engine. I was prepared to pay $750 for the engine and another $2,000 or so to rebuild it plus about $2,000 in adapters. I waited about 6 weeks for the guy to pull the engine and finally gave up on him. About the same time I saw an ad in my local paper. A guy had some military take-out 6.2 diesels for $900. I took this as a sign as to the direction I needed to go. I researched this engine in some of the 6.2 forums and was convinced they were a really good engine. (diesel page and diesel place forums) I haven't found anyone else doing this conversion in an 80 (same with the Isuzu) but there are plenty being done in Australia. I checked the websites there and read the customer reviews, they all sounded great. I went to see the guy about the military 6.2's. He had a truck he converted and let me drive it, it ran great, better power than my old FZJ80. It may not be my first choice but I think it may be the best choice. First the engines are easy to find, the military take-outs are everywhere for under $1000 and most seem to be in great shape. (just make sure you hear it run and do a compression test) It is a proven conversion and parts are available from Advance Adapters. I have about $2,500 in the engine, trans and adapter, it was going to cost me that much just for the Isuzu engine. I don't think it is going to take a lift, although I am swapping to heavier springs (OME stock height heavies) You can check my thread here, I have some pictures of what I have done so far.
https://forum.ih8mud.com/showthread.php?t=184299
It is not finished yet but so far it has been relatively easy and enjoyable. I may change my mind by the time it is all finished though. I have placed the engine in a couple times for trial fitting and there is suprising amount of room around it, should be easy to work on. The mileage won't be as good as the Cummins or the Isuzu probably but I hope to get about 20 mpg with it and considering it is going to be about $2-3,000 cheaper than the other choices I can buy a lot of fuel for that. Hopefully by Christmas I will have it running and let you know if it is a good choice.
Hope that helps
Rusty
 
PM Lagwagon he's working on an adapter for the Mercedes Sprinter van for an 80. That would be my 1st choice. My choice before that was the Isuzu.
 
Lagwagon and I are working on doing some adapters. He's sending me a junk t-case for me to pattern the Cad designs from. He needs one to make the Toy case divorced and I need on for a standard 6-bolt pattern for a ZF-5-speed to bolt to.
 
gineric- if there is a thread on this topic, can you please post a link? BTW I'm going to have to pass on those plates, but thanks for sending the pics over! :cheers:

PM Lagwagon he's working on an adapter for the Mercedes Sprinter van for an 80. That would be my 1st choice. My choice before that was the Isuzu.
 
We are going to put together a divorced case for the option to put any motor/trans combo in the 80 Series. I have the Sprinter motor and trans and it is going in a '91 to test the setup out. I didn't post up yet so people would get there hopes up before it was tested. Sprinters at the wrecking yard auctions are crazy expensive still so parts have not been cheap but the hope is economy and emissions compliance for future smog laws.
 
Back
Top Bottom