Help with handling the load

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

MDarius

I break stuff.
SILVER Star
Joined
Apr 10, 2006
Threads
176
Messages
2,058
Location
Bountiful, UT
I know...lifts have been beaten to death. I know. it's in the FAQ's. I've searched and read and I still don't know. Here's what I need help with:

Symptoms:
  • Sway (Yes, I know I have a heavy roof rack. I'm looking to compensate for that as much as possible)
  • Sag when loaded for trips
  • A little soft when loaded. OK when not.
Accessories, mods, and weight considerations:
Current
  • 850's on the front, 860's on the rear. They're new enough to not be dirty.
  • 130# roof rack, full length
  • ARB front
  • 3rd row installed and I use it.
  • Standard passenger load is 250# back, 300# middle, 400# front (I know, I could stand to lose a little. At 6'4" I carry it well though.)
  • Full size spare underneath (and in the driver's seat. :rimshot:)
  • I probably add 300 to 500 pounds for camping trips, depending on location and duration.
  • Factory hitch, aka: rear slider
Near future:
  • Sliders
  • Winch
I'm less concerned about height than spring performance and handling. I can even something out with spacers if need be.

Pic 1: Here's a pic of the truck empty of passengers with maybe 100# of gear in it. Obviously, no roof rack. Back is a little higher than front, not much.
Pic 2: Empty with roof rack only. The back end settles down a bit. Level? Close.
Pic 3: Camping trip, most of the weight in the back, with 3rd row passengers only.

20160220_144443.webp


20160315_110252.webp


20160305_115728.webp
 
Last edited:
Pic 4: Same trip, same load configuration up top, no passengers inside. You can see one distributing her weight evenly across the top. Level ground as opposed to slight uphill on the last pic.
Pic 5: New trip, same gear, no passengers, weight is more evenly distributed on the rack.

20160305_135720.webp


20160401_144251.webp
 
I was thinking 863's, but I think that maybe with the way I load this thing down, especially with sliders, I should go for 863j, or even 864's. What does the forum think the result will be with each option?
 
Have you ever hit the bump stops while loaded and on the trail? I hit mine a few times with 863's, about 800 pounds of people (using third row) and just enought gear, food, tools, for a day trip. Then i added a 30mm spacer but still felt unstable when heavily loaded and on a tough trail like Rubicon.
863J will give you substantial and permanent unloded stinkbug. May I suggest a set of 863's and a 25-30mm spacer you can install for those heavily laden expeditions. If considerable unladen stinkbug does not bother you the 863J's will accomplish the same thing when loaded.
An 864 is designed for an 80 that is heavy all the time and would ride rough unloaded. However, you might consider an OME 2421, 3" comp spring. At 280 lbs. per inch of compression, it falls inbetween the 863 and 864 and would probably be a little less stinkbug when unloaded.
Or you could weigh your rig and then call Kurt at cruiser outfitters so you would be speaking with a pro. :)
 
Last edited:
You definitely could use heavier rear springs based on the pics and your stats.

Are you against having the almighty stink bug when you're unloaded? If not, go 863s and use spacers to give you 1" taller hub to fender in the rear with your constant load, then trip weight should put you somewhere close to even with hub to fender.

I'm in your same boat but moving from 863s to 864s.
 
A little stinkbug doesn't bother me. I've got passengers in the rear probably 50% of the time its on the road, all the time when off road. It's the main family vehicle. I think I wouldn't like an overly stiff ride. The streets in our town are concrete and the joints are set so that they rattle your teeth out no matter what you're in.

I don't know springs real well, mostly what I've read on here and Slee's site. It seems like with the thicker diameter bar stock the 863's will handle the constant additional weight of the roof rack, heavy tire, and kids, but may not be enough for the full load of a weekend getaway. J's or 864's seem overkill for everyday use. I like the idea of the 2421. Like I said, I'm more concerned about how it handles than I am about the stance, but to some extent they go together.

I've not hit the bumpstops, the first trip was pretty mild and my son was driving last trip and he wouldn't know a bumptstop hit from downshift. (I was trying to think of something witty, but not crude. I got nothing.)
 
I have airbags installed by the P/O that I have never needed to use, he said they worked great for towing his trailer. Food for thought.
 
860-220lbs/inch rate. 863-250lbs/inch rate. 2421-280lbs./inch rate. All three springs have the same fee height. The 863 are 12% stiffer and should compress 12% less for the given load than the 860. At 13% stiffer than the 863, the 2421 offers 13% less sag than 863 and 25% less than 860. The nice thing is that these springs don't break the bank so if you buy a set and don't like them you can sell them in practically new condition for close to what you paid.
Hope this helps put it in perspective.
 
Last edited:
Cool, thanks! That dooes give some perspective.

Yeah, I was just watching some youtube videos about suspensions...because we know everyone on Youtube is qualified by Wikipedia university....I wonder about adjustable shocks in combination with all this. That wouldn't help the sag though. Airbags are good for hauling loads, but are they useful offroad when I want articulation?
 
If you see a heavy duty rear bumper in your future, the 2421 Competition spring may be the best choice.
 
The only shocks I have messed with on the 80 are the OME sport shocks and I feel they work well with the OME springs.
 
Cool, thanks! That dooes give some perspective.

Yeah, I was just watching some youtube videos about suspensions...because we know everyone on Youtube is qualified by Wikipedia university....I wonder about adjustable shocks in combination with all this. That wouldn't help the sag though. Airbags are good for hauling loads, but are they useful offroad when I want articulation?

My rear end seems to flex just fine. based on what I have seen from other trucks the flex seems totally average.
 
Have you considered some of the springs from the two new offerings that have just been released ones from icon other I can't recall there both posted on here. I've been reading about them myself because I'm thinking of pulling the trigger on a lift and have similar thoughts as yourself.
 
Air bags will give you the most diversity in load carrying abilities. Do you like the way it rides when not loaded for camping?

I have many of the same issues and need to bump my rear springs up a notch or two. But plan to goto Slee's 4" units with maybe bags too depending on what the camper does to them when connected.
 
image.webp

Here's 863s with 1900# of bricks and sand over the rear axle just for reference. :)
image.webp

And here it is with 900# over the rear axle on 863s.

Fully loaded with a week of gear and fluids my truck is at 7200#. Your numbers probably put you in that same vicinity as well as far as weight goes. I have bottomed out the rear and my ride height drops down into the 21.5" area in the back so that's why I'm moving up in springs. I also have skid plates and a rear bumper planned soon.

Shocks can make a big difference in handling. I had TJM adj shocks on there first and when dialed down a bit I had very little sway on road. The fox 2.0 IFPs I have now are much more active in the dampening and definitely give more sway on the road. They're far better out on the trail though.

I thought about airbags too, but since I would need to inflate them when I'm out wheeling, I didn't think that would work too well. They would make sense to me to use them when you tow a trailer, for example, getting out somewhere, then unhook the trailer, set up camp, deflate the bags and go hit the trail.

Hope some of that helped.
 
Ha! At first I saw your top picture and thought, "Yup. That's just how mine sits when I go camping before I load people in." Then I read your comment about the bricks! Well, that would be different.

I'll have to look at those Icon springs. I don't think airbags is the route I'll go for my purposes.


I do think it handles the road ok as-is until you get to a turn. It sways too much. I'd like to take the sway out.
 
What are you running for shocks? Proper shocks will combat sway considerably, low speed compression dampening is the name of the game when it comes to body roll in corners and diving under braking.
 
I'm not sure what the PO put on for shocks, but he wasn't setting it up for my loads. I'm sure he got the setup from Slee and it's the medium shocks that come with the medium springs.
 
I'm not sure what the PO put on for shocks, but he wasn't setting it up for my loads. I'm sure he got the setup from Slee and it's the medium shocks that come with the medium springs.

I bet heavy shocks would help, how old are the ones you've got?
 
Back
Top Bottom