Headlight Protection

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 19, 2006
Threads
108
Messages
582
Location
Plano, TX
Just replaced my radiator and saw that replacing my headlight would be a PIA. Living in AZ I encounter rocks all the time thrown up from the road. I would like to add some type of protection to help prevent damage. I know that some mfr's make the steel grills for lights but have never seen any for a FJ80. I would love to see if anyone out there has installed anything along these lines. Eventually when I get my ARB I plan on adding some tabs to be able to install steel mesh as added protection off road. (see photos of a lot of LR defenders.)

Oh and the tinted plastic bling covers are not an option :D
 
IdahoDoug sells the 3M film protection for the 80-Series headlights and turn signals.

-B-
 
How about the 40 mil thick headlight protection plastic (sold on eBay and many other places). It's thick, invisible, removable, and easy to install. Will not protect against boulders, but for flying rocks in the western US, it's the way to go, IMO. There is lots of 20 mil thick plastic for hood protection, etc. but you want the thickest stuff you can get. Some places sell bulk so that you can cut whatever shape you need.
 
I would like to add some type of protection to help prevent damage. I know that some mfr's make the steel grills for lights but have never seen any for a FJ80.

Never seen one?Hmm... :flipoff2: Well welcome to 80s world..bling-bling JDM IPF amber and clear headlight protection.
IPF_01.webp
IPF_02.webp
IPF_03 (2).webp
 
where do you find these things??? you seem to have a line on everything possible for cruisers.:D

cheers.
 
Never seen one?Hmm... :flipoff2: Well welcome to 80s world..bling-bling JDM IPF amber and clear headlight protection.

He was asking for steel, and specifically stated he did not want plastic bling.

-Spike
 
A steel? I guess he also may not need light at night just cover all the headlight with steel :flipoff2:

Steel mesh headlight protectors are a four wheeling thing, you wouldn't understand. :flipoff2:

-Spike
 
I agree, steel mesh is for Jeeps who can't go offroad anyways for fear of breaking something. :lol: The plastic would do a much better job. My only concern is how well they will stand up to the heat/UV out here. Plastic has a tendency to get brittle and cheap plastic will even turn brown and crack.
 
A fine steel wire 1/2" mesh doesn't impair the light in any measurable amount. I would even venture to guess it would affect light output even less than clear plastic covers, and certainly less than bronzed or smoked plastic covers. I wonder why you even brought up the idea of reduced visibility if you're going to advocate colored plastic?

Edit to distinguish between plastic covers and plastic film- I doubt that the plastic film blocks light either.

-Spike
 
Last edited:
Somewhere there's a thread on using the 3M film, and I gave some pricing for the forum. I think a couple dozen or so got them through me and they could provide input on how they're doing, ease of install, etc. My company has installed literally thousands of these with not one warranty replacement or issue.

DougM
 
I'd consider the film but the plastic lenses are about the cheeziest things out there, unless I bring out my 84 IROC.

I'll post a photo of what I'm speaking of at lunch.
 
The standoff plastic covers shown above have the advantage of being able to take a much larger impact, but in practical terms reduce the light's output significantly. They get dirty on the inside, plus add an additional lense with its scratches and light reflections, and unless they're high grade plastic (Polycarbonate) will degrade quickly with weather/UV exposure.

Among films, there are a lot of cheap ones and there is 3M. It's that simple. The 3M film never yellows or chalks up and will even make a pitted glass headlamp look clearer and put more light down the road because it fills the pits with its soft adhesive so the light is not diffracted by those pits. Kind of like how frosted glass looks clear again when its wet.

I want to honor the forum's spirit and not market here, but as a Cruiserhead if you put film on your 80s lights get 3M film from someone. Be advised there is also a company (can't remember name) that actually purchases the 3M logoed paper and puts their own clear film on it, knowing people assume the film is also 3M because the public doesn't realize 3M is also in the release paper (what the film's adhesive is protected with for shipping) business. FYI, 3M's headlight film is 14mils thick so there's your hint.

DougM
 
Back
Top Bottom