Have done, would do over?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Not a lot of love in the 100 community for the OME shocks.

I’ve owned and driven a lot of what I would call average use/build 4x4s. I don’t have anywhere near the off-road experience of the people on the forum, but I’m also not inexperienced.

My 01 is on OME all around and I honestly don’t understand the complaints about ride quality. My truck rides far better on pavement or dirt than I ever would have expected, and far better than the complaints I read on here. It is extremely pleasant.

Maybe I’ve been abused by other rigs? Maybe I didn’t spend enough time with AHC or OEM LC suspension?

My hunch is that people buy springs and shocks from OME with the idea that they need heavier duty due to plans to armor up, or because they will have lots of heavy gear, and then they don’t get the armor or they spend 95% of their seat time in daily driver mode without camping gear and forget that their decision to plan for weight has a direct impact on how the vehicle drives without that weight.
 
I will add a 7th item on your list and that’s the first thing I will do for my “upgrade”, front and rear locking differentials from ARB. That’s makes the truck a ‘true’ four by four. Yup it’s a boring upgrade, no flare, no mean looks, but it will certainly allow you to walk obstacles that most struggle if not get recovered from.
 
I’ve owned and driven a lot of what I would call average use/build 4x4s. I don’t have anywhere near the off-road experience of the people on the forum, but I’m also not inexperienced.

My 01 is on OME all around and I honestly don’t understand the complaints about ride quality. My truck rides far better on pavement or dirt than I ever would have expected, and far better than the complaints I read on here. It is extremely pleasant.

Maybe I’ve been abused by other rigs? Maybe I didn’t spend enough time with AHC or OEM LC suspension?

My hunch is that people buy springs and shocks from OME with the idea that they need heavier duty due to plans to armor up, or because they will have lots of heavy gear, and then they don’t get the armor or they spend 95% of their seat time in daily driver mode without camping gear and forget that their decision to plan for weight has a direct impact on how the vehicle drives without that weight.

As someone who's had the full OME kit, and still has one (of three) 100 series in the driveway with the full OME kit, I'm of the opinion that the OME springs and torsion bars are fine, and while the shocks are durable, their ride quality isn't as good as some of available alternatives. On smooth pavement they're "sporty". On slow offroad, they're "OK". On washboard roads or broken pavement they're "painful".

My hunch is, that those who sing the praises of OME shocks, haven't tried some of the alternatives that are available, or are running their vehicle at well over the GVWR.
 
Hello all. I'm in the process of buying the following:

Lift Kit
Wheels and Tires
Roof Rack/Tent
Rock Sliders
Front Bumper w/winch
Rear Bumper

Given that most of you have explored theses items extensively, which products would you go for if money wasn't a problem at all? Specifically, what lift and wheel tire combo would you go for when creating a comfortable commuter but also a capable off roader? What's the best size and offset for say a 3-4 inch lift? Is there a roof rack/tent option that is just amazing and shouldn't be passed up? What about bumpers and rock sliders, or side steps? I'm slowly putting this vehicle together, and want to do it right. Any advice is greatly appreciated.
Over the past three years, I've done some of the things you've mentioned. The first thing I did was tires (within the first week of ownership). I went with the Toyo Open Country C/Ts, in 285/75-16 (basically a 33"). This size should fit with bone stock suspension. I really like the Toyo C/Ts. It is a tough, nearly indestructible tire. It's basically a slightly more A/T version of the Toyo M-55 commercial tire. C-load rated, but 2-ply sidewalls. My tire guy had a special on them, and I gave them a try. I'm glad I did. I think they are a great *overlanding* tire.

I did the TJM T17 bumper next, mainly because I got hit while parked, and it made sense to spend the $800 settlement on a new bumper as opposed to painting the plastic bumper. I like the way it looks, and I like the ease of mounting lights. I am not currently running a winch.

I had planned to do a roof rack, and spent a lot of time debating which one to buy. I wanted something full-length, wide, and flat. I often have need to haul plywood, lumber, etc. I use the roof rack more for that than I do camping stuff. I ended up designing and building my own using T-slots, and used the Gamiviti towers to mount it. It is perfect, and I couldn't be happier with it. I ended up spending about $650 on the base rack, and with lights, fittings, etc., it totalled about $900. I've got some airline L-track on the top, and using McMaster-Carr hardware, I have all the quick-release eyelets and hooks that the Frontrunner or Rhino platforms provide. In fact, it works just like that in practice.

When COVID set in last year, we started doing a lot of camping. I added a cheap Smittybuilt awning, which has been invaluable. I also realized my suspension was shot. So, I replaced the shocks (Monroe Reflex POS) with OEM Toyota Tokicos, and I put the OME 860 springs in the rear. I kept the factory torsion bars.

Currently, it stinkbugs because the 860s jack up the rear. Looks a little silly, but I do think it DRIVES much better with that stance, particularly on the highway. If I add any more weight up front, however, I am sure I will need to revisit those torsion bars.

I built a homemade tailgate storage solution, which has been great. I can now carry my tools and tie-downs inside the tailgate, so I always have a baseline of equipment with me.

I am now considering some kind of rear drawer system. When we camp, we use coolers, an old Coleman white gas stove, and pack out of Plano Sportsmen's Trunks for our kitchen. We also have 4 kids, and this is one of our daily drivers, so I must keep the 3rd row in. I am kicking around the idea of doing a shallow drawer system that fits behind the 3rd row and gives us a better kitchen operation for pans, utensils, etc. while camping.

I am also considering some kind of on-board air system.

I've tried to take it slow and make improvements based on need. I am also super concerned about keeping the weight down. I think it paid off, because although I love to tinker with it (as we all do), I don't regret nor wish to redo anything I've done so far. I do have to sometimes control myself from really going nuts... I mean, I would love to have a rear bumper, a fridge, etc. But, what I like better is that it is light, flexible, perfect for our current needs, and fits in the garage!
 
Hello all. I'm in the process of buying the following:

Lift Kit
Wheels and Tires
Roof Rack/Tent
Rock Sliders
Front Bumper w/winch
Rear Bumper

Given that most of you have explored theses items extensively, which products would you go for if money wasn't a problem at all? Specifically, what lift and wheel tire combo would you go for when creating a comfortable commuter but also a capable off roader? What's the best size and offset for say a 3-4 inch lift? Is there a roof rack/tent option that is just amazing and shouldn't be passed up? What about bumpers and rock sliders, or side steps? I'm slowly putting this vehicle together, and want to do it right. Any advice is greatly appreciated.

Dissent Offroad armor - buy all of it. If you have an LX with AHC, go aluminum. Not cheap, but looks great and is built very well by an member of our community.
Lift Kit - If you have AHC, keep AHC and enjoy that ride. You can do a couple versions of lift on that, but honestly nothing that will make a step change in capabilities. The 100 doesn't "lift" easily/well. About 2" is all you can get before you run into a diminishing returns situation where the $ goes WAY up and reliability goes WAY down. Armor up and beat up the undercarriage. No lift needed beyond 2".
Storage - this is transformative. Check out the Air Down Gear Up SS1 system. I'm a co-owner. Optional drawers and sleeper and the lightest system available in any of its configurations.
Sliders - get something.

Wheels/tires - 33" tires need no mods and get you lots of capability.

I’ve owned and driven a lot of what I would call average use/build 4x4s. I don’t have anywhere near the off-road experience of the people on the forum, but I’m also not inexperienced.

My 01 is on OME all around and I honestly don’t understand the complaints about ride quality. My truck rides far better on pavement or dirt than I ever would have expected, and far better than the complaints I read on here. It is extremely pleasant.

Maybe I’ve been abused by other rigs? Maybe I didn’t spend enough time with AHC or OEM LC suspension?

My hunch is that people buy springs and shocks from OME with the idea that they need heavier duty due to plans to armor up, or because they will have lots of heavy gear, and then they don’t get the armor or they spend 95% of their seat time in daily driver mode without camping gear and forget that their decision to plan for weight has a direct impact on how the vehicle drives without that weight.
The key with the OME stuff is weight. The shocks aren't meant for a stock-weight rig and will feel, IMO, pretty awful. They're "sporty" but significantly over-damped in a stock weight rig. If you have an extra 500# or more, they're probably fine. Stock weight? You can do so much better.
 
Cant say there is anything I regret doing to my LC but if I had to do it over again I would have gone with an OME lift (instead of IM), Trail Tailor sliders (instead of Metal Tech), and 285's over 265.

*flame shield on*
 
My advise is take your time with your build and evaluate each item you add. Keep the stock wheels and add 33" AT tires. That alone will handle the majority of the wheeling any of us do. Before dumping money on bumpers, sliders, skid plates, etc consider your need for them. A "lift" or suspension upgrade really only needs to be considered as the need to handle addition weight becomes a factor.

These trucks are fantastic as they are and very little modification is needed for the majority of the off roading most of us do.
 
No serious regrets. Though I'm not done yet. I slowed down my purchases until I can see some other products. Some items have really grown on me that I was apprehensive about when I bought them. I still have many items in the garage to install. Though I can't stop wheeling on weekends to take the time to work on it while we have great weather.

I think armor requirements are regional and based on the likelihood of hitting a deer or wild hog. I hit a deer a few years ago and know the damage they can do.

1620946601382.webp


Following other Toyota Off Road Groups, I see shock purchases trending to regional favorites with 5th Gen 4Runners producing the highest volume and owner conversions.


1620947235233.webp
 
  • Like
Reactions: jLB
Cant say there is anything I regret doing to my LC but if I had to do it over again I would have gone with an OME lift (instead of IM), Trail Tailor sliders (instead of Metal Tech), and 285's over 265.

*flame shield on*
What's your reasoning behind the lift and slider changes?
 
Hello all. I'm in the process of buying the following:

Lift Kit
Wheels and Tires
Roof Rack/Tent
Rock Sliders
Front Bumper w/winch
Rear Bumper

Given that most of you have explored theses items extensively, which products would you go for if money wasn't a problem at all? Specifically, what lift and wheel tire combo would you go for when creating a comfortable commuter but also a capable off roader? What's the best size and offset for say a 3-4 inch lift? Is there a roof rack/tent option that is just amazing and shouldn't be passed up? What about bumpers and rock sliders, or side steps? I'm slowly putting this vehicle together, and want to do it right. Any advice is greatly appreciated.
I like my Prinsu rack a lot, and would buy it again. I like my ARB front bumper, but when it's snowing I hate the large flat surface that the snow piles up on. I would buy one that slopes since I drive/park in the snow. Like, it piles up over the headlights in heavy snow. I bought an Ironman lift kit, but didn't really like the shocks and installed Icons. I like my metal tech sliders, but I'm still not crazy about the U-bolt attachment. Would probably still buy again.

I know this is all in the forums, but I think I get your concept of avoiding mistakes.
 
Do you have AHC or stock Land Cruiser springs and shocks?

If you have AHC, I’d keep it and see about getting it back into spec pressures with some maintenance. It is a really slick system for cruising at stock height and then getting some extra clearance once you’re off-road.

Hello all. I'm in the process of buying the following:

Lift Kit
Wheels and Tires
Roof Rack/Tent
Rock Sliders
Front Bumper w/winch
Rear Bumper

Given that most of you have explored theses items extensively, which products would you go for if money wasn't a problem at all? Specifically, what lift and wheel tire combo would you go for when creating a comfortable commuter but also a capable off roader? What's the best size and offset for say a 3-4 inch lift? Is there a roof rack/tent option that is just amazing and shouldn't be passed up? What about bumpers and rock sliders, or side steps? I'm slowly putting this vehicle together, and want to do it right. Any advice is greatly appreciated.
 
I’m on springs, which I think is a good thing. I’m looking for the subtle lift to help with ground clearance, but also to just change the look a little bit, and accommodate those 33’s without sucking up the whole wheel well.
 
What's your reasoning behind the lift and slider changes?
Sliders mostly for aesthetic reasons. I really don't dig the way they flare out in the back. I totally understand the purpose but I just cant dig it.

The lift for a few reasons.. the rear shocks didn't have an easy way to grab onto on the top to get the nut off (like OME does), the rear springs seem to sag much more than you'd expect. I'm talking like if you lean your weight on the rear hatch the back sags down 3/4". I even have the heavier spring rates. Lastly, the instructions that came with my kit were atrocious. They looked like copies of copies of copies that were copied with a potato phone. But really even where it was legible the instructions were severely lacking clear direction. Same thing with the metal bumper. You were left guessing where what washer/screw/bolt goes.
 
I'm pretty happy with everything I've done so far. I have kept weight in the back of my mind while adding stuff, but it still get heavy really quickly. I have @LandCruiserPhil's rock rails and I really like them over real sliders. They work just fine for everything I've encountered so far. I also skipped the steel front bumper and built a hidden winch mount. The winch is nice for peace of mind, but I've only ever used it to pull other people out. I love my dissent rear bumper. It's been very useful for me. The Reef drawer system and my refrigerator are pretty sweet to have, but now we are in bonus territory.

I know they get a lot of hate, but my RTT is awesome and I use it all the time. It's very simple and quick to popup and pull down. The mattress is great. It's comfortable and strong in wind. I have a 6000ish pound rig. Why should I have to sleep on the ground? That said, I don't like having all that weight up high. But it's a compromise. And I don't care if people think I'm a poser.

The best mod I've done is the part-time conversion from Cruiser Outfitters. I feel like an ad for them. It's just great and for "overlanding," which generally means hundreds of miles on the highway and easy dirt roads, it makes a ton of sense. It makes the truck feel even better on the road. Plus it's nice to know I can get home without too much fuss if I break a CV joint or front dif.

The one thing I probably wouldn't do again is the AHC lift. King springs and spacers in the back have helped with weight when the whole family is aboard and we're hauling bikes and dogs and the whole mess. The lift was more of a hassle than I think it was worth. It's hard to argue that an inch and a half of clearance (which is what I settled on) is worth it, I think it makes the 33's look small, and I think it made my CV boot crack. Maybe I'll change my tune if I ever take the jump to 35s. But, so far, I haven't wanted to open that can of worms.
 
I'm pretty happy with everything I've done so far. I have kept weight in the back of my mind while adding stuff, but it still get heavy really quickly. I have @LandCruiserPhil's rock rails and I really like them over real sliders. They work just fine for everything I've encountered so far. I also skipped the steel front bumper and built a hidden winch mount. The winch is nice for peace of mind, but I've only ever used it to pull other people out. I love my dissent rear bumper. It's been very useful for me. The Reef drawer system and my refrigerator are pretty sweet to have, but now we are in bonus territory.

I know they get a lot of hate, but my RTT is awesome and I use it all the time. It's very simple and quick to popup and pull down. The mattress is great. It's comfortable and strong in wind. I have a 6000ish pound rig. Why should I have to sleep on the ground? That said, I don't like having all that weight up high. But it's a compromise. And I don't care if people think I'm a poser.

The best mod I've done is the part-time conversion from Cruiser Outfitters. I feel like an ad for them. It's just great and for "overlanding," which generally means hundreds of miles on the highway and easy dirt roads, it makes a ton of sense. It makes the truck feel even better on the road. Plus it's nice to know I can get home without too much fuss if I break a CV joint or front dif.

The one thing I probably wouldn't do again is the AHC lift. King springs and spacers in the back have helped with weight when the whole family is aboard and we're hauling bikes and dogs and the whole mess. The lift was more of a hassle than I think it was worth. It's hard to argue that an inch and a half of clearance (which is what I settled on) is worth it, I think it makes the 33's look small, and I think it made my CV boot crack. Maybe I'll change my tune if I ever take the jump to 35s. But, so far, I haven't wanted to open that can of worms.

Have you noticed a better gas mileage with the part-time conversion? Any negatives with it that you can speak to?
 
Have you noticed a better gas mileage with the part-time conversion? Any negatives with it that you can speak to?
I try to ignore gas mileage in the Land Cruiser! Haha. But seriously, no, I don't think there is a significant change to the mileage. To my knowledge, no one has reported a real difference. The negatives in my mind are that it's old school - you have to stop, get out and lock the hubs - and that if you accidentally hit the center dif lock button (which is now the 4-wheel drive button) while your hubs are free, you could mess stuff up. But, I put a cover over the button to protect against that and I actually feel kinda cool getting out and locking my hubs. So, those issues don't bother me. Other people worry about the loss of AWD on wet and icy roads. I'm not too worried about that either. I've driven traditional 4x4s in the snow all my life. I just slow down. There's a thread on here with tons of info about it. Worth perusing if you're interested in it.
 
I try to ignore gas mileage in the Land Cruiser! Haha. But seriously, no, I don't think there is a significant change to the mileage. To my knowledge, no one has reported a real difference. The negatives in my mind are that it's old school - you have to stop, get out and lock the hubs - and that if you accidentally hit the center dif lock button (which is now the 4-wheel drive button) while your hubs are free, you could mess stuff up. But, I put a cover over the button to protect against that and I actually feel kinda cool getting out and locking my hubs. So, those issues don't bother me. Other people worry about the loss of AWD on wet and icy roads. I'm not too worried about that either. I've driven traditional 4x4s in the snow all my life. I just slow down. There's a thread on here with tons of info about it. Worth perusing if you're interested in it.
Really appreciate that! Yea gas mileage is never going to get better. Just part of the expense of having fun. The wet/icy roads part is kinda what I was curious about since it would be the truck a RWD when not locked in. Ill have to find that thread to read more about it since this is interesting to me. Thanks!
 
Back
Top Bottom