Hi all. You have probably noticed my thread in the vendor and 40 sections, and I thought that would post this here. I’ve just released a hand-illustrated 60-series t-shirt design that you al might be interested in. I hope all is well! Cheers.
Hand-Illustrated 60-Series T-Shirt
- Thread starter Mike Shull
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #3
Thanks, James! Wait until you see what I am working on next 
It's not a 70 series...yet.
It's not a 70 series...yet.
- Thread starter
- #4
I’ve been learning a lot of design techniques and I’ve enhanced the FJ60 graphic, including straightening some of the lines and closing the gap between the axle housing and the frame.
I am also working on an FJ62 graphic that I expect to have completed in the next month.
Please let me know what you think!
I am also working on an FJ62 graphic that I expect to have completed in the next month.
Please let me know what you think!
Beautiful minimalistic design with an enhanced undercarriage…well done.
I’ll wait for the soon to be released FJ62 brand…any long sleeved T’s on the shelf? Great job! It would be enhanced with a 100% heavy-weight all cotton fabric. Just something to think about in terms of quality to set yourself apart from the maddening crowd of mass produced junk out there. Something to be worn with pride!
I’ll wait for the soon to be released FJ62 brand…any long sleeved T’s on the shelf? Great job! It would be enhanced with a 100% heavy-weight all cotton fabric. Just something to think about in terms of quality to set yourself apart from the maddening crowd of mass produced junk out there. Something to be worn with pride!
- Thread starter
- #6
Hi, @88Retired62. Thank you very much for the compliments! It looks like I need to get a jump on that 62 drawing!
I am working on a J**p drawing at the moment, but I just heard that it will be put on hold as it is in pieces and I need a picture of it together to finish. I am also getting ready to draw a 1981 Toyota truck, a 1984 4Runner and a 1957 Chevy truck. I don't have any potential orders waiting for those graphics so I'll move the 62 to the front of the line. No obligation of course.
I have two long sleeve shirts in the store, though I have only personally ordered the lighter shirt. In addition to a being offered on a lightweight t-shirt, the 60-Series is currently available with a heavy weight long sleeve and a heavy weight zip hoodie. The long sleeve that I am using is a Gildan 5400. Here is a link to the specs: https://www.gildan.com/us/en/5400-adult-long-sleeve-t-shirt-en_us/
Let me know if you have a brand that meets the quality that you are looking for. I've tried about a dozen brands and I've landed on Gildan, but there are hundreds of shirt blanks out there. The Gildan shirts seem to hold up well and are great for the type of graphics that I am drawing.
Cheers!
- Thread starter
- #7
I'm not sure why I stopped working on the FJ62 drawing. I was frustrated with some of the lines, but I pulled the drawing up after work and I was about 95% done.
@88Retired62, have a close look at this design and let me know what I missed. I can probably have this in the store tonight if all of the details look good. The version below has a large graphic on the front of a heavy sweatshirt. I can also put the graphic on the back.
@88Retired62, have a close look at this design and let me know what I missed. I can probably have this in the store tonight if all of the details look good. The version below has a large graphic on the front of a heavy sweatshirt. I can also put the graphic on the back.
I’m familiar with Gildan brand and the 5400 is excellent. There are a few hanging in my closet as we speak. The silhouette design is perfect but by removing the brand (TOYOTA) from the center of the grill an attempt to carry out the minimalist design and keep the the non enthusiast guessing as to the make of the vehicle? It’s probably a minor point but how would it be viewed if “TOYOTA” remained the center feature of the grill. Then again, it may be better not to clutter the design…the headlites are discernible enough for the enthusiast. However, I do like your thought process of scripting the words “62-Series” centered below the bumper/between the wheels as in your 60 Series example above.
Forgive me for “scatter-shooting”…I’m fully aware a huge amount of creative effort was invested to bring this product to fruition…and I whole-heartedly support & compliment you on a job well done…congrats! Put me on your “long-sleeve” customer order list when you bring the final product to market.
Forgive me for “scatter-shooting”…I’m fully aware a huge amount of creative effort was invested to bring this product to fruition…and I whole-heartedly support & compliment you on a job well done…congrats! Put me on your “long-sleeve” customer order list when you bring the final product to market.
- Thread starter
- #9
Thanks for the feedback and please keep the ideas coming. I have had trouble getting shops to print design with brand names, or even a model, like FJxx, which is why I put the words “60-Series” initially. I have been exploring slogans on my non-Toyota line, like these below.
Perhaps I can come up with something catchy for the FJ62 shirt. I am open to suggestions and I have considered opening the custom text field in Etsy but that might be more trouble than it is worth.
- Thread starter
- #10
@88Retired62 and I were chatting offline and I created this for the back of the FJ62 shirt. It's the first ever rear end that I've drawn. Let me know your thoughts!
You draw these by hand? I’d buy a couple 62 shirts.
- Thread starter
- #13
Hi Klip. Yes, I do draw these by hand. They are drawn in vector format so the lines are crisp on a shirt, which is way better than any AI-generated design in my opinion though some of these designs take 8-10+ hours to complete.
I should have the 62 shirts available by the end of the week. I have a few more lines to finish and then I’ll add them to the templates.
Thanks in advance for the support and please help to pass the word.
That’s awesome. Sounds good. I watch you on YouTube also, I really like the drone footage. You travel some beautiful areas. Keep up the good work!
- Thread starter
- #15
Thanks for the feedback! Sometimes I wonder why I make videos. ha!
- Thread starter
- #16
Okay folks, I have FJ62 T-shirts, long sleeves and hoodies loaded into the store. Please let me know if you have any questions or see anything that needs to be fixed.
Cheers!
Mike
Cheers!
Mike
- Thread starter
- #18
- Thread starter
- #19
Outside of drawing Land Cruisers, I am more interested in this project over the Jeep.
I
i would be interested in a 62 hoodie/shirt, but with no text below it