Got my first fj60 (1 Viewer)

[majdomo]

OK guys I got some updates, finally got the call from the machine shop saying that they have had a roadblock. My block needs to be bored 30 over and they can’t seem to find any pistons that size. They also can’t find rod and main bearings .10 under and they also need cam bearings and a cam gear

Does anybody have any leads where I can find these parts at? Thanks in advance.

eBay? These were +.040. Not sure if these are junk.

Toyota Land Cruiser 2F, 4.2 Engine 81-87 +.040 Pistons & Rings 95.00MM bore | eBay

To yota Land Cruiser 81-87 2F Engine FJ40, FJ55, FJ60 Set of 6 +.040 Oversize Pistons & NPR Rings. These pistons are 95.00mm bore Oversize. 040". 4230cc 4.2 Liter 6 cylinder Gas. Standard bore is 94mm + 1.00 = 95.00mm.

www.ebay.com

JT Outfitters for -.010 bearings:

.010 Under Connecting Rod Bearings for Toyota Land Cruiser 1F & 2F FJ40 FJ60 – JT Outfitters

www.jtoutfitters.com

 

[fijianfj60]

eBay? These were +.040. Not sure if these are junk.

Toyota Land Cruiser 2F, 4.2 Engine 81-87 +.040 Pistons & Rings 95.00MM bore | eBay

To yota Land Cruiser 81-87 2F Engine FJ40, FJ55, FJ60 Set of 6 +.040 Oversize Pistons & NPR Rings. These pistons are 95.00mm bore Oversize. 040". 4230cc 4.2 Liter 6 cylinder Gas. Standard bore is 94mm + 1.00 = 95.00mm.

www.ebay.com

JT Outfitters for -.010 bearings:

.010 Under Connecting Rod Bearings for Toyota Land Cruiser 1F & 2F FJ40 FJ60 – JT Outfitters

www.jtoutfitters.com

Sweet thank you majdomo i sent the eBay guy a pm and will call Jt outfitters on Monday

 

[fijianfj60]

All right guys I got my block back from the machine shop manage to find all the parts that were needed to do this job now I have hit a road block with the mean bearing the new means bearings that I got are the Taino m036a which has the thrust bearing built onto the mean bearing and the original one that was on it had the main bearing trust-bearing separate has any one run in to this issue before?