Got my first cruiser !

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 17, 2017
Threads
4
Messages
31
Location
Ohio
picked up a a fzj80 on Craigslist for 1900 bucks... she’s got some body rust and 200k but the frame is good... I need to do a birf rebuild she clicks but hopefully after I tackle
some rust and get the axel squared away she will be a awesome hunting/trail truck it doesn’t have lockers unfortunately.....

2E723C5B-AF8A-4CEC-9B7A-CD9E848FD78B.webp


58C0825B-BF57-410F-9DE3-713176EEEF7E.webp
 
Is it better to rebuild the birfs or buy whole new axel shafts with new cv’s ? I got quoted at like 1200 bucks for a front end work over from a big 4x4 shop that specializes in imported 4x4’s.... new axels with cv’s are like 900 bucks and a rebuild kit is like 150 .... I kind of want to take it to the man just so they can do a full shake down they know what there doing me not so much lol I’m handy but no professional
 
Rebuild it yourself...
 
You only need to replace the driveshafts if they're worn. Wherever you take it, they'll rebuild them: new bearings (less the birfields), seals and possibly drive flanges.
 
Welcome.
The rebuild is not super hard, but real messy, especially if it has not been done in a long time or ever.
It took me more time to clean my knuckle components than rebuilding. If you take it to the shop make sure you get a detailed quote with all the parts so you trully know what you are spending your money on.
 
I would suggest slowing down and doing a lot of researching and reading here on Mud and where ever else you can find accurate info.

You will experience more and more maintenance needs on your aging cruiser so buying a factory service manual and enduring the inconvenience of doing the work yourself will save you a lot of money if you plan to keep the 80 a long time.

Nitro sells replacement birf’s. The only reason you may need new inner shafts is if the oil seal land is grooved so deeply oil leaks past the seal into the knuckle. The knuckle job is dirty but elementary. You can do it.
 
DIY and learn about your ride. It’s a good experience and will save a ton of money. There are plenty of step by step walk through a On here. Also,what year is it. We have most FSM’s in PDF floating around here.

:flipoff2:Welcome
 
It’s a 93 with 200k even I love the motivation on here looks like I’m getting greasy !
 
What’s the name of that guy who orders all the parts for the rebuild ?
 
Congrats Bro
 
By the way, once I had all my parts, it probably took me a full day and the next morning to do the first side, but only maybe three hours for the other side. I was going really slowly and figuring things out as I went along.

I used quite a bit of mineral spirits and a toothbrush to clean out the Birfields, and probably one can each of brake cleaner to finish off. Be prepared for a huge mess, and buy some three-packs of those absorbent blue shop paper towels. Get one of those huge, shallow drip pans at Walmart, too.

The Harbor Freight seal & bearing driver worked great. I did my trunnion bearings, wheel bearings, and all the seals with it.
 
It’s crazy how much I love driving this old rusty truck with 200k ... it’s absoultly a beast lol ! I never drove one until I bought this .... I don’t think I would ever buy another jeep lol.... my fav part about the whole truck is the tailgate lol that’s the coolest thing ever on a suv !
 
Is there a sticky for the rebuild I typed birfield rebuild in the search and Iv found a whole lot of random threads that have the word birfield in it with no usefull intel
 
DIY and learn about your ride. It’s a good experience and will save a ton of money. There are plenty of step by step walk through a On here. Also,what year is it. We have most FSM’s in PDF floating around here.

:flipoff2:Welcome
It’s a 93 bud I’d love to have a copy of a service manual
 
Is there a sticky for the rebuild I typed birfield rebuild in the search and Iv found a whole lot of random threads that have the word birfield in it with no usefull intel
Welcome to the Mud archives. Sometimes is does take a lot of digging to find exactly what you are looking for but life is about the journey isn't it? I prefer a hard copy of the FSM. Yes some of my pages have dirty finger prints on them and the binding is beginning to fall apart but it's right there where I need it for a quick reference. And, sometimes, you just have to jump in head first and see what happens next.
 
It’s a 93 bud I’d love to have a copy of a service manual


Looks like 94 will be your best bet. Others may know better than me about the differences in axle design between the years as I’ve only ever had full floaters. The 92 is gonna have a different motor so I wouldn’t recommend that one. I have the 96 Birfmark copy that I print before I do messy jobs and a paper copy in the workbench in the garage I use for research.

For Sale - 40, 50, 60, and 80 series FSM for a hell of a price.

Also, here’s a pretty good video by Jonesys Off-road.

 
Last edited:
Back
Top Bottom