Got my 40, now what?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 22, 2005
Threads
2
Messages
5
Location
Michigan's Upper Peninsula
Website
www.aaronpeterson.net
Was finally able to get a cruiser. Got a stock 40 built in 12/1970 (is it a 70 or 71?). Runs good, but all lights are inop, floorboards are gone, needs tires but the rest I can live with for awhile. How about a "top 10" things you would do? I'm looking at it for a DD with moderate offroad on logging roads. No rock crawling in my future.

Specific questions I have:
Recommended books for maintenance?
What is the stuff on the dashboard supposed to do?
What width were stock rims on these and what's a recommended tire size (r 33s' doable w/o lift?)

gonna try and post some pix too. paid $3,200, thought it was fair, if it wasn't, tell me, i can take it. just don't tell my wife.

sorry for so many questions but i'm having a hard time finding help locally.

thanks.
 
Welcome.


Verify the functionality of all your systems. Focus on safety and function before making things look pretty.


Books?


Factory Service Manual, FSM.


" What is the stuff on the dashboard supposed to do? "


Little less ambiguity with this one please...


15x6 were stock rims...IIRC.


The tech trivia, tech links and 40 series FAQ section have an AMAZING amount of information...



Good luck!


-Steve
 
Welcome to MUD and congrats on your new cruiser. I paid 3,500 for my first one in similar condition, from what I can tell, so you're not too bad off (some will disagree).

Functional floor boards might be and important thing ;) . Haynes manuals are pretty vague on most things. Though I don't have any, I hear the FSMs are what the pros use.

Should be able to find all the help you need from the guys on here. And the tech articles and search function will help a lot. :D
 
APPHOTO said:
\Specific questions I have:
Recommended books for maintenance?
What is the stuff on the dashboard supposed to do?
What width were stock rims on these and what's a recommended tire size (r 33s' doable w/o lift?)

thanks.
i'll ditto the oem manuals. they pop up on ebay all the time.
here's a page from an owner's manual to help you on the dash stuff
you may want to do extended shackles in the rear to keep the tires out of the fender lip, but try the tires on first to see.

congrats.
dash.webp
 
Unless you like being a Flintstone, Id fix the floors. Hell I drove around with a 55mph road sign and a washing machine door for floors so Im not one to brag, but not falling onto the pavement is nice.

Baby steps grasshopper, baby steps.

Buy the FSMs

Hodag
 
I agree factory manuals are best. If not get a Hanes. You may be able to find a good deal on ebay. or garage sale or used book store. I routinely have friends or myself check this places out.

Check all the fluids make sure they look normal may even change it to be on the safe side. if you have not already done so. A tune would be nice. This part may take for every. Basically need to check everything has been kept up and if in question replace it. If you have points keep an extra set and buy a feeler gauge.

Clean under the gas take....make sure thier is no dirt, this area can problematice with rust......wait a minute you have no floors. :) Also clean the frame sometimes dirt may trap itself there causing the frame to rust.

But once you get it running they are very dependable.
 
1. Purchase the FSM's, as so many have said. They are indispensable.
2. Replace all fluids.
3. Check your brakes.
4. Check your tie rod ends/steering components.

If you have brakes and steering you probably won't kill yourself or anyone else. After that its just triage, what needs to be fixed first. Don't get discouraged, fix one thing at a time and do it right, dont be intimidated by the huge list of things you will find you want to improve/fix. For instance I ran mine for years without a floor, just got around to welding in a new one this year, becuase I worked on electrical and engine first.

Oh yeah, this may seem like a silly detail but I would Gunk it. Its easier and more pleasant to work on a reasonably clean vehicle. Have fun!
 
If it was made in 12/70, then it's a '71.

Make sure it stops and steers safely before you make it go. "Safely" as in if your mother was driving it, not you.
 
[What width were stock rims on these and what's a recommended tire size (r 33s' doable w/o lift?)
]

looks like you already have stock rims and hubcaps, some people run 33 x 9:50 BFG AT's w/ little to no lift on 40's... search and you will find, and nice cruiser!
 
Just got your email. I am DELIGHTED to have another Cruiser owner here. I saw your truck for sale and was mildly interested, but my stable is kinda full right now. We will get together, soon I hope.

Sean
 
Finding this site is half of the battle won. There is years of reading available on this site, the search function should be your first quest for answers. Just spend time reading on here for awhile, familiarize yourself with your rig and DEFINITELY get the manuals. Welcome and good luck!
 
Back
Top Bottom