FZJ80 Head Differences by Year?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sorry. First photo is the rotor with the distributor fully installed. The second is the marked line on the distributor edge to match with the marked line on the head. Also mark the back of the distributor where it makes contact with the head. The last picture is the rotor after its CCW rotation after you slide it out. Basically, match the last photo to put it back in correctly and line up the marks. As long as the marks line up and the rotor is in the same position, then your timing will be just fine. Super straightforward.

20180610_185513.webp


20180610_190323.webp


20180610_191032.webp
 
So, first things first. VC off, here are some shots, incl close on #5 tube that released oil-drenched plug, and #5 seal. (Tube was dry before pulling plug.) Hoping this might help trace cause...

Thanks for any help!
image.webp
image.webp
image.webp
image.webp
image.webp
 
Back
Top Bottom