FZJ80 Armrest

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
27
Messages
484
Location
14 mins from the bus
After accumulating quite a few hours in the 100, I have come to the conclusion that I must have some sort of armrest in the 80. :princess:
Has anyone attempted to incorporate the armrest of the 100 into the seat of an 80? I really dig the way it functions.
I searched MUD on this subject, & I ended up emailing Steve Laird. However, all of the post about his work were fairly dated & I don't expect to have one of his armrests in my posession any time soon.

Thanks
 
No I don't know how to incorporate one but I would love to have one on my rig too. I use to have a tahoe and it was a lot more comfortable having an armrest. So once you figure it out I would love to hear about it.
 
Chris,

I too am interested in some type of armrest, dont have any good ideas but i will look around. I would definately be willing to spend a little if it ment i could have a sturdy armrest in the 80. Someone has to have some type of aftermarket one that works.
 
Yeah, I think it was Steve, wasn't it that had some years ago? I can't remember if they were comercial, but I seem to remember them being so.

I used to miss the armrest, fo sure, but have found I have adapted to a general position. My elbow on the centre console, and my wrist resting on the top of the shifter...


TY
 
Guys I have literally 2 armrests in the attic. They are ONLY in Black vinyl. I can remake them if anyone is interested...in all honesty it will be around $85.00. When i had my site, www.landcruisers.Com, the desire for these faded away...I still have no idea why. Anyway, I can post a pic of what I have in my truck...I just dont know of the way to do it on this site. Maybe someone can give me their e-mail so I can forward it to them..if someone is interested.
airlaird
 
Yes they install with 4 screws into the console. I used to sell the Oak and Grey in leather but the cost bacame very high..........about $60.00 per unit to get leather sewn on. The black molded armrests were around $90.00..the leather ran $135.00...that was three years ago. i'll post some pics. If theres any interst I can look into making them again. The front passenger side is literally impossible to put one on. The seat is too close and front passenger would have his left elbow in his ribs!
airlaird
 
I might be interested in grey leather. Post up some pics please or PM me and I'll fire you my email address and I'll post them for you.
 
Hey Steve, So do you have these on your own truck? If so, I want to check them out at the next Lone Star BBQ Meeting. My big question is WHY didn't these cruisers come with these to begin with?
 
Why did the Japanese not put these on the cruiser, who knows.... Same reason why they did not put rear A/C, or cupholders in the dash like they did in the Japanese Cruisers..........no one knows. I sent some folks some pics last night..hopefuly they will post it today.
airlaird
 
Well for crying outloud...I'll post them myself ;-)) Reffug they on the way to you. I'll send a quick write up to post as well
airlaird
 
This is the Armrest. It is pivotable and attaches to the side of the console.....you must have the opening center lid for it to work.
Due to the cost of leather I can't get them done for under $150.00...so it is unlikely I'll be doing them in leather.
The black armrest is the exact same shape and size also in polyurethane injected molded..just without leather. I have not made these in about 2 years so I have no idea how much the costs for the bracket or the molded piece has gone up. If there is some interest I can look into making these again. Each unit is time consuming as my wife sews the leatherette cover for the bracket. Anyway, here they are. I'm sure I can keep these under $100.00
Steve

OK fella's here is my first attempt at posting these via a different channel than I would normally use.
armrest1.webp
 
Thanks Steve for sending me the pics to share and last but not least I feel we should all see a pic of Steve schweeeeeeet looking 80. :grinpimp:
stevesrig.webp
 
Back
Top Bottom