Fusible link connector

[landcruiser80]

I am fixing some of the weird wiring that the PO had going on and I have come to the fusible link. I bought a brand new one from Toyota but the connector for the third wire (the one not going to the little black box) has been changed on my wiring harness.

Does anyone know a part number or alternate source for a stock connector. I could cut the fusible link and make my own but I want it to be plug and play, the way it is supposed to be. Here is a picture of the new connector that had been added,

Edit- Here is a thread where the same question was asked that I was not able to find in my searches, fusible link clip question

 

[Rainen]

Going to see what you come up with here, I need to do the same on my rig. Good luck!!

 

[Solace in Solitude]

I'm not an 80 guy, but @Coolerman may have what you need.

 

[120mm]

Related question; I swapped out my fusible link and the black plastic housing shattered.

Anyone know what part # that is?

 

[landcruiser80]

I remember a thread about that box, let me go find it...

 

[landcruiser80]

Related question; I swapped out my fusible link and the black plastic housing shattered.

Anyone know what part # that is?

Here ya go,
Fusible Link Box
Fusible Link Black Box Part Number?
Looks like it is 82670-60040

 

[hammerheadfistpunch]

Related question; I swapped out my fusible link and the black plastic housing shattered.

Anyone know what part # that is?

Tape. Its what I'm using.

 

[120mm]

Here ya go,
Fusible Link Box
Fusible Link Black Box Part Number?
Looks like it is 82670-60040

Thanks!

Tape. Its what I'm using.

Story of my life, man....

 

[SmokingRocks]

Tape and zip ties...

 

[landcruiser80]

As per this quote from Beno, "If the connector is a Toyota connector, you can get the 5 digit number off of the back of it and the first five numbers will be 90980-XXXXX. You can then order the correct connector for the application from whomever you get your OEM parts from."

Here are some pictures of the connector.
The number on the back of the connector is 10983 which should make the PN for this connector 90980-10983. Would someone mind grabbing the number off the back of the harness side connector so I can get the right one? Also a picture of the connector itself would be handy so I at least know what it looks like.

 

[landcruiser80]

Anybody? There are no local 80's to me so I can't check this myself.

 

[landcrshr]

Looks like the connector housing is part# 90980-10982

And the repair wire is part# 82998-12470

 

[landcruiser80]

Perfect! Thanks.

 

[landcruiser80]

Brown Santa showed up today. Thanks Beno!
It will be nice having it back to factory condition.

 

[silverhorse]

THANKS FOR THE INFO, IM HAVING THE SAME PROBLEM

 

[jbstrong01]

Brown Santa showed up today. Thanks Beno!
It will be nice having it back to factory condition.
View attachment 1260023 View attachment 1260024

AMAZING! My PO hacked this and now I am going back to OEM. Appreciate the deets!