Fuel pump leak

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 4, 2018
Threads
39
Messages
155
Location
Austin, Texas
So, I have a new OEM fuel pump ordered and on the way. Is there any thing I should be aware of when changing it out? Is the old one holding fluid that will spew out or anything like that? Or just a simple unbolt and put the new one on, super easy.
 
Just don’t stick anything into the bolt holes other than bolts, like the spray straw on a can of carb cleaner, say for cleaning the bolt holes before bolting on the new pump. Those holes go all the way into the oil pan cavity. If the straw shoots off it will disappear into the oil pan. I’ve never done this :rolleyes:
 
Pay attention to the spacer details, make sure what you're putting back on matches what you took off. If your pump has been leaking much you should check your oil to see if it was diluted by the fuel, an oil change may be needed.
 
What is this proper way to unconnect this line? Should I just be loosening the top nut?

unnamed.webp
 
Back
Top Bottom