Fuel Filter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 10, 2008
Threads
26
Messages
92
Hi,

I want to replace the fuel filter on my 97 LC.

Two questions:
1. Should I use the standard OEM or the latest and greatest (whatever that is)
2. Are there any other inline filters that should be replaced if so where are they located.

thanks,
 
oem is best. not sure if there is anything else that would compare. ive got one sitting in the garage that still needs to be put in. post up a write up on how you did it...from the looks of it, it looks to be a major PITA. probably why many dealers dont want to service it, saying its a lifetime part.
 
where is the fuel filter located on a 92LC?
 
It's an easy job with the right tools :)

Took me 20 minutes on a lift and the majority of that time was waiting for the fuel to drain completely....

This is what it looks like:

fzjfuelfilter.JPG


Some guys cut a slot on the mounting tab nearest to the engine so they could slide the new filter in with the bolt already threaded in place, but I just used a really long extension and taped the bolts to the socket after I connected the lines :cool:




Rick
 
It's an easy job with the right tools :)

Took me 20 minutes on a lift and the majority of that time was waiting for the fuel to drain completely....

This is what it looks like:

fzjfuelfilter.JPG


Some guys cut a slot on the mounting tab nearest to the engine so they could slide the new filter in with the bolt already threaded in place, but I just used a really long extension and taped the bolts to the socket after I connected the lines :cool:




Rick

thanks, do those holes on the bolt have to be lined up to a certain point. I have a 97 so it is close to the firewall on the drivers side right?
 
Patience and time and cursing will get the job done in no time :) Is not that hard, just bunch of s***s gets in the way.
 
is this job done from under the truck?
 
is this job done from under the truck?

IIRC, you can get at the end banjo fittings from above. If you lay underneath next to the DS wheel, look up and you will see the fuel filter. You can use a long extension to get to the bolts.

If you remove your fuel cap and let it sit for a bit it will de-pressurize the fuel system. That's what I have done and I only lost a tiny bit of fuel.
 
Back
Top Bottom