Front heater plumbing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 21, 2017
Threads
48
Messages
462
Location
Toronto
Hi,
This is a 1974 US FJ40 with stock front heater and had an OEM rear heater which I have sinec binned as it leaked badly. I have a Havasu heater I am plumbing in back now and forget which is the intake and which is the return...can someone please confirm if A or B is the hot source or return?

Thanks!


Some other pics too for fun.

HEATER CORE LABELLED.webp


20190908_132338.webp


20190908_132256.webp


20190908_132332.webp
 
I didn't think it mattered which is feed and which is return as long as there is circulation.
 
I didn't think it mattered which is feed and which is return as long as there is circulation.
I would agree with that downstream of the water control valve, but that has to be on the driver side B line so it lines up with the captive nuts in the firewall, correct? The rear heather, stock or otherwise, works the same both ways.
 
Thanks guys. It matters to the auxiliary rear heater which has specfic inlet and outlet connections presumably because it fills from the bottom-up.

brian; I sat it in it and set the height myself. I am an average-proportioned 5'11" and have ~4 inches headroom to the headliner. I also checked head clearance to the roll cage, my head cannot reach the crossbar.
 
Thanks guys. It matters to the auxiliary rear heater which has specfic inlet and outlet connections presumably because it fills from the bottom-up.

brian; I sat it in it and set the height myself. I am an average-proportioned 5'11" and have ~4 inches headroom to the headliner. I also checked head clearance to the roll cage, my head cannot reach the crossbar.
Proximity to the back of the front seat.
 
Its not a bad fit, I have freshly rebuilt'reupholstered Supra seats in front.

And yes, all 3 of my kids are well under 10 yrs. :)
 
Back
Top Bottom