Front Differential Breather Extension

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 31, 2018
Threads
8
Messages
54
Location
California
This process is well documented, but I ran into something no one has mentioned. My front hose terminates in a diff mounted bracket just like the back one, but it then plugs into a device also mounted on the diff housing and has the spring-load breather cap on top (see picture). I don't know what this is or why it doesn't appear in any of the images or videos I found for this procedure and don't want to bypass it without knowing.
Any insight would be welcome.
front diff breather.webp
 
simply unbolt throw in spare parts pile and run your hose up under hood attach to firewall and pop on a cheap fuel filter
 
Seriously though. How do you think landcruiserslast for so long? The secret is in the thin oil coating
He right, got all the oil leaks fixed & cleaned it all up now my rust free Cruiser is starting to get little rust spots here & there.
 
So you can't tell me what it is, but I should just through it away. OK...
I can't find it in any of the parts diagrams either. If it has any inherent value (and I assume those anal retentive engineers at Toyota thought so), then I might just move it up to the firewall rather than a fuel filter. I'd just like to know what it does.
BTW, Much of the black glossy surface you see is actually POR15 rust preventative coating. The whole undercarriage is treated with it, as this Cruiser started it's life in the Northeast. That said, I'm on my way to the garage with the de-greaser now. :cautious:
Thanks
 
So you can't tell me what it is, but I should just through it away. OK...
I can't find it in any of the parts diagrams either. If it has any inherent value (and I assume those anal retentive engineers at Toyota thought so), then I might just move it up to the firewall rather than a fuel filter. I'd just like to know what it does.
BTW, Much of the black glossy surface you see is actually POR15 rust preventative coating. The whole undercarriage is treated with it, as this Cruiser started it's life in the Northeast. That said, I'm on my way to the garage with the de-greaser now. :cautious:
Thanks

It a 1 way breather for the front diff. You can/will eliminate it when you extend your diff breather up higher in the engine bay. You can and could reuse it higher up but most guys use a low cost plastic fuel filter.
 
Thanks Phil,
Just surprised when I found it, as the rear one didn't have one.
I finished the rear extension, running the hose through the rubber gasket used by the wiring brocade and high up into the compartment behind the taillight. Thinking I might run the front into the fender compartment used by the intake.
Happy Trails!
 
Back
Top Bottom