Front Bumper Fog Light Install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 12, 2013
Threads
15
Messages
59
Location
Missoula, MT
I was looking to add a couple auxiliary lights/fog lights to my front bumper since the headlights just aren't cutting it. I'm pretty sure I'm going to stay with round lights to match the headlights, but any recommendations as to which brand, what size, and how to mount them on the front bumper? Also any insight as to the best way to wire them so I can have an independent switch maybe under the steering wheel? Thanks in advance,
 
OEM fogs are great if you can find them.

There's a dash switch available too.

i-pDSVnsL-M.jpg
 
Try @ToyotaMatt

Has some OEM driving and fog lights
 
SOR has a oem style kit if that suits your fancy. I wired mine with the provided wires and switch.

I also went with the SOR fog lights. No complaints in the 5 years of use and they are much more reasonably priced; even with their ridiculous shipping costs.

Fotor_15984638476187.jpg
 
Last edited:
Lamp:


I take it back the brackets came from Amayama.


Yes sir. I’ll shoot you the details.

Before these became popular scored a pair of OEM fog lights and brackets off eBay for $75. No one else bid on them. Seller was on Mud at the time and convinced him to bring just brackets in as those were harder to find while fog lights can be purchased thru US dealers. He sold those on Mud for $50 a set. Many including myself had a set minus the bracket. Another past member lived in Japan for a while and I got replacement lamps.

My original plan was to install them on early Cruisers. But that's changed. Would be interested in OEM fog light switches if you have information.
 
I offer 3 Unique and Different FOG / AUX PULL Switch Kits for FJ40 and FJ55 All 100% Toyota Genuine NEW / NOS Parts :


Both OEM NON-USA and SEMA Spec. NON-USA Versions Available ......


- each comes with a 100% OEM Toyota YAZAKI parts maker service spec connector pig tail connector


i hand make in-house at the skunk works lab !











DSCN9809_2048x.JPG




1635309484074.webp




1635309509240.webp



DSCN6662_2048x.jpg


DSCN2453_2048x.jpg





DSCN9810_d2b9adf9-1d8c-4e97-9a07-f8eca8226cf9_2048x.JPG

DSCN9811_2048x.JPG

DSCN9812_2048x.JPG

DSCN9814_2048x.JPG
 
Back
Top Bottom