ARCHIVE Front bumper build
- Thread starter UnderDawg
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
double post
Bahhh on a cops salary you should have no trouble buying 2.
I wish I was a cop. At least those dicks get paid OT!
LFD2037
TEXAS LEXUS!
I dig it! Can a winch be mounted on it? What's the price on that bad boy?
UnderDawg
Wannabe welder
- Thread starter
- #188
I've been debating over the price on the front bumper for a few weeks now...
Special introductory price is gonna be around $700.00 plus shipping*
That includes
Instructions
Bumper wings
Bolt on winch plate
skid plate
Grade 8-10 hardware
Bolt on stinger your choice of size
Option for flared or flare-less
Powder coating is available as well $120.00
Bumper will ship UPS ground and after all the haggling I got a darn good deal on shipping finally.
This is a very light but strong option for those tired of the same 3 or 4 designed bumpers that have been around forever. Priced extremely well for an all 3/16" constructed plate bumper. The fact that you dont have to buy a whole new bumper if you wreck it should speak for itself, no one else offers such a thing (as far as I'm aware of anyway).
PM with any questions or if you'd like to order one.
Watch this thread for other designs and options.
Thanks guys
Special introductory price is gonna be around $700.00 plus shipping*
That includes
Instructions
Bumper wings
Bolt on winch plate
skid plate
Grade 8-10 hardware
Bolt on stinger your choice of size
Option for flared or flare-less
Powder coating is available as well $120.00
Bumper will ship UPS ground and after all the haggling I got a darn good deal on shipping finally.
This is a very light but strong option for those tired of the same 3 or 4 designed bumpers that have been around forever. Priced extremely well for an all 3/16" constructed plate bumper. The fact that you dont have to buy a whole new bumper if you wreck it should speak for itself, no one else offers such a thing (as far as I'm aware of anyway).
PM with any questions or if you'd like to order one.
Watch this thread for other designs and options.
Thanks guys
Last edited:
Nice ideas flowing in this thread! Keep it up.
Well here ya go, I call this done.
All feedback welcomed.
100% completely modular.
Bolt on installation
The ability to replace one component if damage occurs
Durable Mil-Spec powder coating
Grade 8 or 10 hardware
With the winch mount and skid plate being the main platform. Wings are easily removed for touch up or replacement with a different style wing.
With this universal mount you could run a rock crawling minimalist bumper wing set up and then switch to a more substantial design wing set up when needed.
3 different stingers will be offered in small, medium, or large. Other configurations are available also.
Light mounts, Hi-lift mounts, limb risers are also gonna be available.
Thanks for looking. Let me know what you think.
Jason
Jason
PM me with price and info. I like this bumper.
Well here ya go, I call this done.
All feedback welcomed.
100% completely modular.
Bolt on installation
The ability to replace one component if damage occurs
Durable Mil-Spec powder coating
Grade 8 or 10 hardware
With the winch mount and skid plate being the main platform. Wings are easily removed for touch up or replacement with a different style wing.
With this universal mount you could run a rock crawling minimalist bumper wing set up and then switch to a more substantial design wing set up when needed.
3 different stingers will be offered in small, medium, or large. Other configurations are available also.
Light mounts, Hi-lift mounts, limb risers are also gonna be available.
Thanks for looking. Let me know what you think.
Jason
Jason
PM me with price and info. I like this bumper.
Hornd
SILVER Star
If you have a drill press might be worth it to look into a Annular Cutter, I recommend Hougen (Fastenal). They are much quicker but they must be drilled perpendicular. Even if you loose a few teeth they will still get the job done, albeit slower.
http://www.hougen.com/
Hornd
SILVER Star
If you have a drill press might be worth it to look into a Annular Cutter, I recommend Hougen (Fastenal). They are much quicker but they must be drilled perpendicular.
UnderDawg
Wannabe welder
UnderDawg
Wannabe welder
- Thread starter
- #197
Some day light pics
Shown with the small stinger
Mid sized will come up past the Toyota emblem
Large will be to the hood line
You can see from this picture the amount of burn in on the 1/2" plate
Side view
Please post up or PM with any questions, comments or ordering details.
Shown with the small stinger
Mid sized will come up past the Toyota emblem
Large will be to the hood line
You can see from this picture the amount of burn in on the 1/2" plate
Side view
Please post up or PM with any questions, comments or ordering details.
Last edited:
bluecruiser
SILVER Star
Profile shot looks great. Just as about as close as you can get it and still get a winch in there. Really good looking product. Whoever requested the smaller hoop has a good eye. 
. Thx again.
. Thx again.
UnderDawg
Wannabe welder
- Thread starter
- #199
Hmmm wonder who that was???Profile shot looks great. Just as about as close as you can get it and still get a winch in there. Really good looking product. Whoever requested the smaller hoop has a good eye.
The winch tray will be pushed out about 2 more inches to help accommodate more winches. It will still be tucked up in there though.
Still waiting on that 80, but I will definitely continue to watch this thread evolve with time.
Love the modular design, and ability to 'customize' to your needs | design interests.
Keep up the great work!
Love the modular design, and ability to 'customize' to your needs | design interests.
Keep up the great work!
