For Sale / Wanted To Buy (3 Viewers)

[jfz80]

WTB : body mounts

Just checking the collective parts horde for any good condition body mounts. I need 4 (they are divided by support bracket so 8 pieces)

Here is the delima. They are not the same as the 40 series and I dont have the truck here to compare with to see what will and wont work. From what Ive read:

55 and 60/62 series body mounts work well and are round vs. square like the OEM.

Otherwise im ordering an energy suspension kit or 80durometer 2'' rod next week.

thanks

 

[matthewcory]

all my smog equipment from a 1989 '62. ...

 

[3pits]

Jason, do you need the rubber mounts or the steel parts that are riveted to the frame?

 

[R.K.]

FJ40 hard top side sliding windows for sale. I bought these windows for my '73 FJ40 way back when I was in high school (15 years ago!) and never installed them in the Cruiser. They have been stored in the rafters of the carport ever since.

I removed the windows from an FJ40 in a 4wd junkyard in Fayetteville. They are in pretty good condition from what I remember. I'm pretty sure they are aftermarket, or a dealer installed option.

I'll take $100 for the pair.

 

[J-Bo]

I'm looking for some used tires.

I need some used tires to move my wrecked 80 around my driveway so these can be bald. Let me know if anyone has some old tires that will fit a 16" wheel.

If you have some old 16" or bigger wheels, I may be interested in those too.

Thanks

 

[JMRINS]

I need some used tires to move my wrecked 80 around my driveway so these can be bald. Let me know if anyone has some old tires that will fit a 16" wheel.

If you have some old 16" or bigger wheels, I may be interested in those too.

Thanks

i think we have an old set of bald tires you can have. let me make sure there haven't been tossed yet.

 

[J-Bo]

i think we have an old set of bald tires you can have. let me make sure there haven't been tossed yet.

I appreciate it. However, I sold my 80 yesterday and the buyer has some wheels and tires to bolt on so it can be towed.

Thanks again though.

 

[BMThiker]

WTB: a single 80 series alloy wheel. Picking up 4 from Benke and need a 5th.

FS: new GY Wrangler Silent Armor 285/70R/17 all-terrain. Excellent condition, 700 miles of drivetime on it (was my spare).

 

[informationjunky]

WTB: a single 80 series alloy wheel. Picking up 4 from Benke and need a 5th.

FS: new GY Wrangler Silent Armor 285/70R/17 all-terrain. Excellent condition, 700 miles of drivetime on it (was my spare).

Hubcentric or lugcentric? The pick and pull in Buford had a 80 that the spare was still under...don't know what they would want for it. If you get in a pinch, I have a spare rim for mine I could loan you untill ya find one.

 

[BMThiker]

I'm not sure yet. I guess I've put the cart in front of the horse a little. This is still somewhat of an experiment and I don't have benke's wheels in hand. I'd rather have hubcentric, but just want to match what I'm getting from benke as best I can. And I don't even know if they'll fit yet. I plan to do a 5 wheel rotation to extend the life of the new tires.

 

[JMRINS]

NOT MINE.....ARB for Truck/4 Runner....Craigslist

ARB All-Steel Bumper

 

[89s rule]

NOT MINE.....ARB for Truck/4 Runner....Craigslist

ARB All-Steel Bumper

Hopefully picking it up tonight. Anyone know if these came with brackets to mount up or not?

 

[TeddyBoy]

Garage Sale due to SAS (with more parts coming)

I have 2 shocks that came off the front of my 89 truck. I ran 2 inch ball-joint spacers (which I still have if interested) and +/-1.5" on the torsion bars so these should accommodate roughly 3-5" of lift in the front. Shocks have about 3K miles on them and +/- 10 trail rides so they're in great shape. Paid almost $100 for the pair brand new.

Asking $45 for the pair before they go on Craigslist.


Have 1x 33x12.50x15 that makes a great trail spare, has a little life left in it. I will have 2 matching tires in the next week or so. No punctures or patches. Also will have 3 more 33x12.50x15 tires coming soon but different brand that these

Asking $25

 

[charlestonfj60]

IT DID NOT SELL. BUYER BACKED OUT. STILL FOR SALE!!!!

Going to try sell local before I put it in the main classifieds:

FZJ80 Safari Snorkel, used but in great condition. I have all the hardware and the templete. I paid $250.00 and thats what Im asking.

 

[Senoj]

1972 FJ40 for Sale......

Don't want to

 

[R.K.]

FJ40 roll cage

Listing for a friend, email him at tym@triad.rr.com if interested.

6-point DOM roll cage for an FJ40 for sale. Has built in mounts for Corbeau seats. $500 Located in Reidsville, NC.

 

[S.CarolinaFZJ80]

Sent you a PM. What's your PayPal? I can pick it up Monday.

IT DID NOT SELL. BUYER BACKED OUT. STILL FOR SALE!!!!

Going to try sell local before I put it in the main classifieds:

FZJ80 Safari Snorkel, used but in great condition. I have all the hardware and the templete. I paid $250.00 and thats what Im asking.

 

[J-Bo]

FZJ80 Lift, Bumpers, and Other Misc Parts

I have changed direction as far as what I am doing with my 80. I have sold it as a whole to Atlanta Custom Creations so for individual parts you may want to contact Brian at ACC. ACC Toyota Truck & Land Cruiser

What I do have are the aftermarket parts I am parting with off of the truck. I really need to sell this stuff to get them out of my shop and prepare to modify my 4Runner.

Again, I prefer to sell these part locally (I'm in Greenville, SC) so I can avoid having to deal with shipping, but I will ship if I have to.

I have come off of the prices I previously listed in order to move them quickly. All prices are OBO.

Slee Offroad 4" Lift - coils, links, sway bar and bump stop spacers, and beefy Slee caster correction control arms. I do not have the shocks. I am asking for $1,500. This lift sells for over $3,000 new with the control arms selling for $1,000 by themselves.

4x4 Labs Rear Bumper - duel swing out carriers with high lift mount. This was a do-it-yourself kit. This option was cheaper and I like to weld. Currently, the bumper shell is welded together. All that remains to be welded are the swing arm assembly. I am asking for $750.00.

Metal Tech Sliders - Heavy duty Metal Tech 4x4 sliders. These are painted for easy touch up. Includes all the hardware for installation and welded skid plate protection for the cat. converter. I am asking $650.00.

Husky Floor Liners (Grey) - $50 for all of them.

Misc Parts (stock front and rear bumpers, headlight, turn signals, drive shafts, steering stabilizer kit, front fender flares). If you see something, let me know.

Shoot me a PM if you are interested and If you have any questions, let me know.

Thanks!

 

[lt1fire]

High pinion 3rd
$350

Complete rear FZJ80 axle $400
Out of a 94 with 140k on it

 

[lt1fire]

Is that a broken DC shaft??