$£¥¢ For Sale / Trade / Wanted

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

IvE got these
IMG_20160521_163108363_HDR.webp
IMG_20160521_163150325.webp
 
Axle/suspension /frame donor!
1994 Land cruiser
Finally got ahold of the guy, special cat. And that is coming from me! has about 170k, no lockers, cloth seats :bounce: and the driver rear quarter panel is creamed. Missed the frame and rear axle, but the rear door doesn't open... Tags expired in 2007, cali plates. Story goes the head gasket went, had the head machined and replaced the gasket. When reassembling the head he 'got the shims all cornfused' and just threw them in. So it has a lifter tick, good oil pressure and a bad coolant line on the firewall. So it is full of water and the coolant looks like it :(

Interior looks like a truck that has hauled hay, but the A/C works! I entertained him but he isn't budging as $1200 is as low as he will go, this vehicle is well worth it. Even has some brand new OE springs, shocks and assorted tun up parts, but 'they will be extra'. And his $300 winch on the CL he isn't selling for any less than $400. Plus he 'wont answer the phone if he can help it' and no texting. Special cat...

In my eyes its a 600-800 Cruiser and I think after a month if he decides it worth that(and his mother is tired of looking at it) it'll be my next new wheeler! Fingers crossed, but not holding my breath.
 
Hey Guys I need 2 spare tires 315/75 R16 Nothing special just whatever I can get my hands on ASAP

I have 2 unmounted, 1 mounted and 2 wheels for them, if you want the hassle. I would like 1 back eventually (my spare) lol
 
Finally got ahold of the guy, special cat. And that is coming from me! has about 170k, no lockers, cloth seats :bounce: and the driver rear quarter panel is creamed. Missed the frame and rear axle, but the rear door doesn't open... Tags expired in 2007, cali plates. Story goes the head gasket went, had the head machined and replaced the gasket. When reassembling the head he 'got the shims all cornfused' and just threw them in. So it has a lifter tick, good oil pressure and a bad coolant line on the firewall. So it is full of water and the coolant looks like it :(

Interior looks like a truck that has hauled hay, but the A/C works! I entertained him but he isn't budging as $1200 is as low as he will go, this vehicle is well worth it. Even has some brand new OE springs, shocks and assorted tun up parts, but 'they will be extra'. And his $300 winch on the CL he isn't selling for any less than $400. Plus he 'wont answer the phone if he can help it' and no texting. Special cat...

In my eyes its a 600-800 Cruiser and I think after a month if he decides it worth that(and his mother is tired of looking at it) it'll be my next new wheeler! Fingers crossed, but not holding my breath.

Did you happen to see the spare "new" engine he has for that truck? He's asking 1400 for the engine, but the only receipt he can seem to provide is from orient engine inc, in Falmouth KY and has little information about what was done other than the serial number and a cost of 2900ish, from 10 years ago. He just kept saying "its a complete new engine" but who knows what that actually means. He's a few hours away from me, so I'm trying to gather some info ahead of time.
 
Did you happen to see the spare "new" engine he has for that truck? He's asking 1400 for the engine, but the only receipt he can seem to provide is from orient engine inc, in Falmouth KY and has little information about what was done other than the serial number and a cost of 2900ish, from 10 years ago. He just kept saying "its a complete new engine" but who knows what that actually means. He's a few hours away from me, so I'm trying to gather some info ahead of time.
I didn't see it as it was 'in the shop across the street'. He didn't hide anything from me, but did mention that the engine was built and tested on a machine for Mercedes engines. Not sure what that meant... If you want I can try to go look at it and get some pictures at least for you. Might take a couple of days, he wasn't the quickest responder to messages.
 
I didn't see it as it was 'in the shop across the street'. He didn't hide anything from me, but did mention that the engine was built and tested on a machine for Mercedes engines. Not sure what that meant... If you want I can try to go look at it and get some pictures at least for you. Might take a couple of days, he wasn't the quickest responder to messages.

If you wouldn't mind, I might ask you to do just that. He also told me the Mercedes engine story, which I didn't understand the relevance of considering the lack of detail. His sister sent me a pic of the receipt tonight, I'm going to call the number on it tomorrow and see if the shop is still in business. Thanks for your help!
 
If you wouldn't mind, I might ask you to do just that. He also told me the Mercedes engine story, which I didn't understand the relevance of considering the lack of detail. His sister sent me a pic of the receipt tonight, I'm going to call the number on it tomorrow and see if the shop is still in business. Thanks for your help!
I tried getting ahold of him earlier, waiting to hear back and I'll let you know the details.
 
Like i always say. Dont drunk Craigslist.....
/offtopic
Chatting with a guy while buying some bike parts talking about drunk buying, his buddy decided at 2am it was a good time to purchase 3 full size air bounce houses with slides. When they showed up to his door the allure was lost.
 
I can just see that slide set up at the zip-line hole or right there at the hole next to camp! :rolleyes:You guys could have a contest on who splats the furthest! Take a breathalizer and figure out a ratio of distance over blood alcohol!! You think the BA would improve the distance or take away?? :hmm::flush:
 
Back
Top Bottom