FJ62 1989 STARTING PROBLEMS (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 26, 2018
Threads
4
Messages
17
Location
OC CALIFORNIA
Starting cold is hard. When it starts I need to let it warm up, because if I touch the accelerator pedal it'll die. If I pull out the manual accelerator cable two clicks that helps it start. It does not take a long time to get to the point I can take off.

I'm getting engine warning light too. Code no 12 and 22.

I'm hoping there's some simple answers out there. Especially after looking through the FSM.
 
Starting cold is hard. When it starts I need to let it warm up, because if I touch the accelerator pedal it'll die. If I pull out the manual accelerator cable two clicks that helps it start. It does not take a long time to get to the point I can take off.

I'm getting engine warning light too. Code no 12 and 22.

I'm hoping there's some simple answers out there. Especially after looking through the FSM.
Time to hit the books! Follow the codes. :) Land Cruiser Factory Service Manuals (FSMs) - https://www.cruisercult.com/factory-service-manuals
 

Users who are viewing this thread

Back
Top Bottom