fj40 steering with soa ???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 22, 2004
Threads
13
Messages
55
Location
walnut Il.
i need to know what to do to the steering of the '76 fj40 with an soa, i need to keep it as in expensive as possible, i can fab. almost anything but i need to know the best designs!and where to route the arms,,,,or am i better of buiing a steering kit ;i have seen them for around 500.00 but i dont have that, does anyone have a used steering sysem for sale????? i need alot of pics
 
What about that guy, 'W' in Oregon that will bend the stock arms for a reasonable price. Is he still an option?
 
65swb45 said:
What about that guy, 'W' in Oregon that will bend the stock arms for a reasonable price. Is he still an option?

W will bend your stock arms for $75 I believe. I run a set of his arms right now and no problems. Give him a call at Over The Hill 4x4 And yes I have switched out my shocks :flipoff2:
SOA03.webp
 
I have a "double" steering arm spare, but I would highly recommend upgrading the tierod and drag-link with this design though. This especially if you are running power steering. Since you are SOA, I am guessing you have 35's or bigger. I bent and twisted a drag link like it was cool, using the double arm, stock tie-ros and drag-link, and FJ60 power steering, and 35's. Since the drag link bend I have gone with Hy-steer, and not regretted it. IMO it is worth it to stick the $$$ back and go that route.
 
IMHO, steering is of the utmost importance.. don't skimp on it...


I have seen a DL bent enough along with a drop pittman arm that the stock steering was retained..
However I don't reccomend it...
 
cheap: W's bent arms (or REALLY cheap, welded double arms)
mid-grade: Marlin Crawler histeer arms
pimpin nice: 4x4 Labs

I've done the really cheap welded POS and it survived fine, but I never trusted it....did the normal histeer arms and it was fine....now run the pimpin nice 4x4 Labs stuff and like it the best by far....easiest steering of the bunch, tie rod nicely protected behind the axle, and Luke will custom -tweak what you order to meet your specific needs.

Unfortunately, with a '76, yer a little SOL....no one makes "normal" histeer arms for 78-older knuckles, so you are either going cheap (or unsafe REALLY cheap) or the full pimp option...
 
Use a drop pitman arm

You can also run the stock steering arms and keep everything (tierod AND draglink) under the springs by using a 4" J**P drop pitman arm on a Saginaw box. I've done this on several cruisers and have run one myself for a number of years. If you do go this route I highly recommend a steering box brace. to help support the box. The drop arm will put more leverage on the box.

But, the best option is to spend the extra money and get the high-steer arms.
 
woody said:
cheap: W's bent arms (or REALLY cheap, welded double arms)
mid-grade: Marlin Crawler histeer arms
pimpin nice: 4x4 Labs

I've done the really cheap welded POS and it survived fine, but I never trusted it....did the normal histeer arms and it was fine....now run the pimpin nice 4x4 Labs stuff and like it the best by far....easiest steering of the bunch, tie rod nicely protected behind the axle, and Luke will custom -tweak what you order to meet your specific needs.

Unfortunately, with a '76, yer a little SOL....no one makes "normal" histeer arms for 78-older knuckles, so you are either going cheap (or unsafe REALLY cheap) or the full pimp option...

As far as I know out of all the Cascade Cruiser guys that run it, James the mechanic has been the only one to bend a stock cruiser arm with his rig. That was with 39.5's. My arms were on Mark Hawley's rig before they were put on mine, and WHEN he wheeled his rig he wheeled it hard ;p
 
i've got a double steering arm that my friend's dad welded up for me and it's worked great, but it's not a pos either. he's an engineer by trade and extremely competant welder...if he wasn't i wouldn't run it...i've seen some really buggered setups. i do agree that hi steer is the way to go, but it is pricey...best price i've seen is all pro (199/arms only), but they are for later model (wide bolt pattern)knuckles, so you'd have to change out your knuckles
 
miker said:
You can also run the stock steering arms and keep everything (tierod AND draglink) under the springs by using a 4" J**P drop pitman arm on a Saginaw box. I've done this on several cruisers and have run one myself for a number of years. If you do go this route I highly recommend a steering box brace. to help support the box. The drop arm will put more leverage on the box.

But, the best option is to spend the extra money and get the high-steer arms.


I run this setup, so far so good but I expect huge problems every time I go out. I bought the double arm but decided that building a drop pitman was easier. Gonna save up for Luke's and hope for the best until then.

I will sell you the welded double arm i bought from Cruiser Outfitters if you want to go that route. It is welded but looks very good, it should fit you small knuckles as well as I have a '76 also. PM me if you are interested.

I welded my own drop pitman, unless you are absolutely sure what you are doing, don't do it. It can be done, but probably shouldn't.
 
If I were going on the cheap I would go with W's arms, the double knuckle loosens the bolts bad, cause when it pushs on the top it pulls on the bottom, been there done that.
never again....sheared bolts on the trail are no fun.
Butch
 
following up on Butch's sheared bolts comment, I keep a torque wrench in camp with a 17mm on it, and retorque my knuckles every single morning....IMO, allowing them to loosen AT ALL is a major contributor to steering arm/knuckle problems. IIRC, 79ftlbs....
 
You smart guys are ruining my potential sale :flipoff2:

Nice to know that, makes a lot of sense now that you mention it.. another vote for Luke's then.

BTW...how hard are the studs to drill and easy-out while out in the middle of nowhere, I bet that did suck.
 
pbgbottle said:
i have some info i scooped off the net to make a double steering arm . but i would recommend
buying 4x4 labs steering arms . see a couple of pics here

http://www.cardomain.com/memberpage/394774/5

ok with the double steering arm, do i use 2 tie rods , steering rods, etc. or is the purbose of this to just lift the placement of the the rods up about 3-4 inches???? also what do i need to do with the box(i dont know what its called) that is on the front inside the right frame rail????? that the stabilizer it bolted too also could i get some pics of a front end with the double steering arm option completed!!
 
need pics

guys i just dont understand how the rods are supposed to go arround the springs ..it doesnt look like it will work........i need a pic of the finished front end thanks guys
 
doesn't aqualu make a double arm for both sizes of knuckles?
 
3_puppies said:
doesn't aqualu make a double arm for both sizes of knuckles?
english???
sorry i dont know what ya mean...
 
Back
Top Bottom