FJ40 - How hot's your differential

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 5, 2006
Threads
18
Messages
359
Location
St. Johns County FL
About 4 months ago I took my 72 FJ40 into the shop to have the rear axle bearings and seals replaced. This stopped the leaking seals and I now have functional brakes again. However, I now notice that my differential is uncomfortably hot to touch after about an hour of highway driving. I never bothered to feel it before so I don't know if it got this hot before the rebuild. I did check the gear oil and it's right up to the top of the filler. Any FJ40 owners out there ever noticed the temperature of their differential after a long highway speed drive?
 
The rule of thumb is.. final drive units run 80 to 100 degrees above ambient temp. no matter what make or model.. whether it be auto, ag, or industrial drives......
 
Like you could hold your finger for a 5 count ?
Mine get pretty hot , just to convince myself I was worried for nothin I drove my 04 f250 for about 30 min on freeway and pulled over , felt diff. Well I'll be damned , very similar to what I think my fj40 felt like. Best indicator is to put a q-tip or rag in thru fill hole and get some fluid , if it smells burnt then you got a prob. maybe. My suggestion is to gauge it off another good running vehicle you got.
 
Yep-Gets pretty hot. Not boiling hot, but uncomfortable hot.
 
This is one of those times when one of those remote IR temperature gauges comes in really handy. Just re-geared the rear diff in my pickup, I kept an eye on the temps of the housing while I broke in the new gears and bearings. Temps never went over 150 degs, even after some highway miles.
 
The hottest I've ever felt mine was after driving 22 miles on the freeway without gear lube. That was hot enough to boil water off. If you're near that, you've got a problem.

Oh Yeah... That was a night (and a mistake) not to beforgotten. :(


Mark...
 
Thanks for the feedback folks. Sounds like mine's not out of the normal range. I just get a little paranoid every time I take it to the shop for some mechanical work; it seems they never do things completely right. (Which is why I've only taken her in four times since she went out of warranty 1973!) Gotta love these Toys.
 
Remote temp gauges are great tools and harbor freight is making them affordable. They had a $40. one for a while, and still do, but now I see a smaller version that they sell for $10.

I have the first cheap one and it works good but haven't tried the second even cheaper one.

With one of those you just aim the lazer dot at what you want to measure and it reads the temp within a degree or two.

Good tool for diagnosing plugged radiators and deciding if differentials, transfercases, and transmissions are getting hot enough to need work.

Mostly you don't even have to crawl under the truck to hit the target and take it's temp.
 
Back
Top Bottom