Fixed My Brake Problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 27, 2006
Threads
52
Messages
940
Location
Tempe, Arizona
I've complained about the 80 brakes in the past... after today I won't again ever :flipoff2:

Replaced the front calipers with new ones, stuck in fresh pads (non oem), and bled it real well. It now locks up the brakes whenever I like, a nice change from the pure crap they were before. Anyone having issues with the brakes would probably do well with nice refurbed/new calipers or at least rebuilt ones... anyway, my little :grinpimp: for the day.
 
I have begun musing a custom big-brake conversion after the summer because I've recently been noticing heat fade more and more when slowing from 50mph+.
 
I have begun musing a custom big-brake conversion after the summer because I've recently been noticing heat fade more and more when slowing from 50mph+.
I have had that issue as well, I'd imagine it will still have issues when running it hard but I guess that's to be expected unless you want to drop $$$$.
 
Indeed... such is the nature of the beast when you are trying to stop a 3 ton vehicle repeatedly...

If I do go big brakes, I'll also work out some custom ducting to force air into the brakes to cool them :D
 
Use DBA slotted and FJ100's pads in front; DBA slotted rear; really helps.

...
 
Use DBA slotted and FJ100's pads in front; DBA slotted rear; really helps.

...

As I understood FJ-100 pads last more because they have more material, but when compared with the 80 pads on a 80 cruiser what´s the defining advantage ?

Is more surface contact between the pad and the rotor ?

Is the pad material better then the 80´s pad ? :confused:
 
Rob,

Nobody really knows, but it's becoming a part of 80 lore that 100 pads (which last longer due to the extra material) actually improve braking over stock pads. Larger surface area with no changes anywhere else in the system produce lower pad pressure per square inch - that's physics. It also changes the front/rear braking % because the rears are still at the same PSI. Somehow, this is "improving" braking, tho.....

Do me a favor so I don't have to ask this. Request a copy of the test protocol and the test results so the issue will be put to rest for all.

DougM
 
hmm, less pressure over a larger area might also cause more rotational friction....the physics of it all!!l
 
Or, if you are able to lockup your tired with the 80 series pads there may still be an excess of potential pressure that the brake system is unable to realize due to friction limits of your tires. If that were the case, the 100 series pads theoretically could be 'just as good' if not a little better.

Wouldn't help with brake fade though, which is the biggest issue to me.
 
Rob,

Nobody really knows, but it's becoming a part of 80 lore that 100 pads (which last longer due to the extra material) actually improve braking over stock pads. Larger surface area with no changes anywhere else in the system produce lower pad pressure per square inch - that's physics. It also changes the front/rear braking % because the rears are still at the same PSI. Somehow, this is "improving" braking, tho.....

Do me a favor so I don't have to ask this. Request a copy of the test protocol and the test results so the issue will be put to rest for all.

DougM

Thanks Doug !!!!!!!

That should put a rest on 80´s versus 100´s stock pads but now let´s say I get some exotic 100´s replacement pads like a carbon/metallic or what else new compound is released in the market by some NASA "parts supplier", then they "should" brake better than the stock 100´s , and of course when installed on a 80, this larger contact surface and "better" pad would lock and burn the tires, right ? :confused:
 
Last edited:
I had some semi-metallics that covered the backing more widely with material. For about the first 50k miles everything was great. Then the outside edges started to wrap around the edge of my rotors ever so slightly. Not a big deal except for the intermittent metal on metal rubbing noise that was produced with brakes not applied.

After about 80k miles on my powerstop rotors and hawk pads my calipers needed replaced (185k miles on the vehicle and original calipers). I didn't touch the rotors and with about 20k miles left on the larger Hawk pads I went back to the standard 80 sized semi-metallics. I hate noises. Stopping feels the same though there may be some neglible difference, I can't tell. Going from the stock set-up to the powerstops with semi metallics was a night and day improvement.
 
Back
Top Bottom