fender flare question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 8, 2007
Threads
14
Messages
108
Location
Filthadelphia, pa
hey guys. i've been looking at a 97 and it has a few bumps but i'm most likely going to take it home this week. This is a stupid question with a short answer.

I looked at this truck twice, and the current owner tore the flare off yesterday and sent me this picture and asked if i was still interested.

based on the picture, is the black part just rubber and removable? I am planning on pulling the flares off anyway, so i don't care that it is missing. I just dont want to have to paint the thing.

Thanks.
070607_10531.webp
 
It looks like he pulled the flare and the bumper end cap...

Is that bumper tweaked?

Be sure to check the quarter pannel and the piece between the bumper and the grill... It looks to me like he may have had a fender bender, took off the offended parts... Look deeper and make sure he's not passing off more serious issues.
 
mine was just painted metal behind the flares - was that a black rig that was painted white? you will have to deal with the holes in the body anyway.

When i ran a carfax on it, it was white from the factory. But now that you mention it, i'm wondering if it was a poor repair job wherein they got a new front fender and painted it with the flare on it.
 
It looks like he pulled the flare and the bumper end cap...

Is that bumper tweaked?

Be sure to check the quarter pannel and the piece between the bumper and the grill... It looks to me like he may have had a fender bender, took off the offended parts... Look deeper and make sure he's not passing off more serious issues.

he said he clipped a light pole and caught the flare / cap on it. he has the flare still and said it just needs clips. I wanted to deflare the rig and throw a shortbus bumper on it anyway, but i don't want to get into a tweaked fender/bumper mounts.
 
The bumper mounts won't matter if you are putting a short bus on but definately figure out what is up with that fender. Maybe there is a VIN tag somewhere on the inside? The photo almost looks like an attempt at photoshoping rhino on the fender.

Is this rig local for you? If so go check out the damage yourself if you are traveling to get this get more detailed photos and ask more questions.
 
The bumper mounts won't matter if you are putting a short bus on but definately figure out what is up with that fender. Maybe there is a VIN tag somewhere on the inside? The photo almost looks like an attempt at photoshoping rhino on the fender.

Is this rig local for you? If so go check out the damage yourself if you are traveling to get this get more detailed photos and ask more questions.

the rig is about 30 mins from me. I am going to go look at it again. i had one of the art guys at work blow the picture up and it looks like in fact it is a replacement fender that was painted with the flare on. i guess it is a good thing it happened before i bought it, if the damage isn't so bad i'm probably going to still buy it, just at a discounted rate if he'll take my offer.
 
Back
Top Bottom