fairlead wont fit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 11, 2006
Threads
25
Messages
101
Location
Tallahassee, FL
Website
www.florida4x4.com
I have a ARB winch bumper. I bought the Warn 9500XP, made some sapcers to clear the electric motor off the bumper. The only problem i have now is that the fairlead dosnt fit correctly under the lip of the bumper that mimics the shape of the fairlead. The fairlead is sitting too low and the hole that the winch wire come through the bumper isnt lined up. Do i just drill new holes in the fairlead to bring it in the correct spot (up) ? Also what are the other two slot/holes in the bumper for? The small one below bent some the other nite going through a mud area, kinda disapointing but oh well. The bumper was on the truck when i bought it so i didnt get any instructions for the mounting. Thanks
 
I had to drill holes for my fairlead for my Warn M12K. Put it were it is suppose to be, mark where the holes should be and drill.
 
Just to clarify, if you need to drill new holes, you drill them in the fairlead, not in the bumper.
-B-
 
Just to clarify, if you need to drill new holes, you drill them in the fairlead, not in the bumper.
-B-

thanks for clarifying B-.
 
10.4 i just wanted to make sure. ill get new pics of the truck after i get this worked out. thanks
 
Just to clarify, if you need to drill new holes, you drill them in the fairlead, not in the bumper.
-B-

This is so true-a good friend drilled the bumper instead because it looks like the right thing to do, but then the holes don't line up with the holes in the winch body. Damn funny.

You drill the fairlead.

You drill the fairlead.

You drill the fairlead.

You DON'T drill the bumper.
 
This is so true-a good friend drilled the bumper instead because it looks like the right thing to do, but then the holes don't line up with the holes in the winch body. Damn funny.

You drill the fairlead.

You drill the fairlead.

You drill the fairlead.

You DON'T drill the bumper.

Same here. A couple of years ago, a friend called for help installing a new M12 in his brand new ARB. I got there about 10 minutes too late and they were standing around scratching their heads on why the winch wouldn't fit. There were 2 new holes in the bumper matched perfectly with the pre-drilled holes in the fairlead. :o

The good news is the redrilled fairlead covers up the extra holes in the ARB. :D

-B-
 
Same here. A couple of years ago, a friend called for help installing a new M12 in his brand new ARB. I got there about 10 minutes too late and they were standing around scratching their heads on why the winch wouldn't fit. There were 2 new holes in the bumper matched perfectly with the pre-drilled holes in the fairlead. :o

The good news is the redrilled fairlead covers up the extra holes in the ARB. :D

-B-

I bet I know who that was....;)

The scairy thing is he works for the government.
 
so i bolted it up tonite. i had to drop the hole 1", so the fairlead wont shift around with the bolts being that low? if the ARB bumpers are for the Warn winches then why do you have to drill holes?

hey they will let anyone fly, a old school buddy that was a STONER and wannabe rockstar now flys workers out to the oil rigs in a helicopter.... needless to say everyone that knows him got a good laugh out of that one.
 
Back
Top Bottom